Rezultatele cercetării

Ne propunem să valorificăm resursele existente la nivelul facultății noastre și să explorăm noi teme cu un potențial ridicat de inovare.

Oportunitati de publicare in volumul special al jurnalului FORESTS

Jurnalul FOREST este o publicatie ISI cu factor de impact 2.633 care ofera posibilitatea publicarii articolelor stiintifice intr-un numar special intitulat Novelties in Wood Engineering and Forestry. Lucrarile se pot transmite pana la data de 31 August 2023. Pentru mai multe informatii, descarca AICI.

Contracte Internaționale

2012Inside/Outside/In Between - Acord bilateral cercetare, New Design University Sankt Polten si UAUIM, Coordonator: Prof.dr.Cionca Marina – Universitatea Transilvania Brasov – Partener
Proiect CEEPUS. SK-0310 (perioada de desfasurare 2008- 2018). Non-traditional processes in production technologies and integration of the study and research in the Eastern and Central Europe universities. Coordonator: Prof.dr. Radulescu Loredana Anne-Marie

2013

Inside - Outside / Up and Down- New Design University, Institutul Cultural Roman din Viena, Kronospan Romania, Asociatia Romana a Producatorilor de Mobila. Acorduri bilaterale de cercetare EU. Coordonator: Prof.dr.Cionca Marina – Universitatea Transilvania Brasov – Partener 2013-2014

2014

Village Public Spaces. Interventions. Acord bilateral cercetare, New Design University Sankt Polten si UAUIM. Coordonator: Prof.dr.Cionca Marina – Universitatea Transilvania Brasov – Partener 2014-2015

2015

Novel learning approach for ERGOnomic principles for deSIGNers working in the upholstery and sleep sectors by using Virtual Reality (ERGOSIGN) – Proiect Erasmus+ Coordonator Prof.dr.Camelia Coşereanu – Universitatea Transilvania Brasov – Partener 2015-2017
Metamorphosis of a Rural Household 2, Acord bilateral cercetare nr. 4913/28.04.2016., New Design University Sankt Polten. Coordonator: Prof.dr. Cionca Marina – Universitatea Transilvania Brasov – Partener 2016

2017

Experimental research regarding the characteristics of beech (Fagus sylvatica) heat treated by EDS technology/Cercetări experimentale asupra caracteristicilor materialului lemnos din specia Fag, tratat termic prin procedeul EDS. Contract nr.15826/ 11.11.2016 (2016-2017) in parteneriat cu EDS Laboratory, Japonia. Valoare contract: 16109.41 EUR Coordonator: Conf.dr.Lidia Gurau.

2018

Audituri de certificare FSC si PEFC. Contract nr. 11560/ 12.09.2018. Institutul tehnologic FCBA Franța. Coordonator: Conf.dr. Octavia Zeleniuc.

2019

Proiect FACET https://facetproject.eu/ -“Furniture sector Avant-garde Creativity and Entrepreneurship Training” ("Creativitate de avangardă și instruire antreprenorială în sectorul de mobilier"). Consorțiul, condus de DISTRETTO INTERNI E DESIGN - DID, Italia cuprinde 8 parteneri din 6 țări: Italia (3), Spania, Portugalia, Republica Cehă, Grecia și România. Facultatea de Ingineria Lemnului este membră a acestui proiect. Coordonator din partea universitatii: Conf.dr.Lidia Gurau.
Proiect DITRAMA - “Digital transformation manager: leading companies in Furniture value chain to implement their digital transformation strategy” ("Managerul de transformare digitală: companii de vârf în domeniul lanțului de mobilier pentru a-și implementa strategia de transformare digitală"). Proiectul este coordonat de către Centre de Difusió Tecnològica de la Fusta i el Moble de Catalunya – CENFIM, Spania, într-un consorțiu alcătuit din 12 parteneri din 8 țări: Spania, Danemarca, Belgia, Italia, Polonia, Portugalia, Republica Cehă şi România. Coordonator din partea universitatii: Conf.dr.Lidia Gurau.
Audituri de certificare FSC si PEFC. Contract nr. 8751/ 05.08.2019. Institutul tehnologic FCBA Franța. Coordonator: Conf.dr. Octavia Zeleniuc

2020

Proiect TABLE - “TAckling Sustainability Environment through Blended Learning occasions for ivEt in the mobile and wood sector”. Proiectul este coordonat de către ENERGIES 2050 din Franța, într-un consorțiu alcătuit din 6 parteneri din 5 țări: Franta, Italia, Spania, România şi Polonia. Coordonator din partea universitatii: Conf.dr.Luminița-Maria BRENCI.
Audituri de certificare FSC si PEFC. Contract nr. 9180/ 09.09.2020. Institutul tehnologic FCBA Franța. Coordonator: Conf.dr. Octavia Zeleniuc

2024

Proiect CirCLER - “Circular Economy Transition Manager: guiding companies of the furniture value chain to deploy their transition strategy for a more circular economy”. Proiectul este coordonat de către AMBIT - Centre De Difusio Tecnologica De La Fusta I Del Moble De Catalunya (Spania), într-un consorțiu alcătuit din 16 parteneri din 9 țări: Spania, Italia, Irlanda, Germania, Ucraina, Finlanda, Romania, Belgia si Slovenia. Coordonator din partea universitatii: Conf.dr.Luminița-Maria BRENCI.

Contracte nationale cu terti

2011

Grant PNCD12 – Parteneriate, tip PC, Compozite (bio)degradabile cu inserţii textile pentru produse ambientale ecologice - BIOCOMPTEX Valoare grant: 400 000 lei, finantator: UEFISCDI, contract nr. 72-200/2008 perioada: 2008-2011 – Coordonator: Prof.dr.Coşereanu Camelia

2012

Determinarea emisiei de formaldehida din placaj pentru lucrari de interior si elemente mulate din lemn stratificat. STRATUSCOM BLAJ SRL. Cntract nr. 13243/04.09.2012. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din placaj pentru lucrari de interior si elemente mulate din lemn stratificat. STRATUSMOB BLAJ SRL. Contract nr. 13886/14.09.2012. Coordonator” Conf.dr.Zeleniuc Octavia

2013

Project ID: WOOD - "Clustering knowledge, Innovation and Design in the SEE WOOD sector" - Pachet de lucru 3, activitatea 3.4 - ADR Centru Alba Iulia. Coordonator: Sef lucr.dr. Olărescu Alin
Fete de usi pentru interior - semifabricat MDF. Asociatia de standardizare din Romania – ASRO. Contract nr. 1004/28.01.2013. Coordonator: Conf.dr.Zeleniuc Octavia
Evaluarea emisiei de formaldehida din panouri stratificate din fag. Incleiate cu diversi adezivi, prin metoda Analiza gazului, conf. SR EN 717/2. SC Akzo Nobel Coatings SRL. Contract nr. 18293/20.12.2013. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea formaldehidei din panouri pe baza de lemn. HOLZINDUSTRIE SCHWEIGHOFER BACO SRL BACAU. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din placaj, incleiat cu diferiti adezivi, prin metoda camerei conf SR EN 717/1. SC Kronospan Sebes SA. Contract nr. 5821/13.05.2013. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din placaj pentru lucrari de interior si elemente mulate din lemn stratificat conform SR EN 636 placi cu grosimea nominala pana la 40 mm, prin metoda Analiza gazului conf SR EN 717/2. STRATUSCOM BLAJ SRL. Contract nr. 3606/25.03.2013. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din placaj de 10 mm pentru lucrari de interior prin metoda Analiza gazului conf SR EN 717/2 si incadrarea in clasa E1 de emisie, conform SR EN 636. STRATUSCOM BLAJ SRL. Contract nr. 6009/16.05.2013. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de aldehida formica in placaj si elemente mulate din lemn stratificat si incadrarea in conditiile SR EN 636. STRATUSCOM BLAJ SRL. Contract. Nr. 16121/06.11.2013. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de aldehida formica din panouri din lemn masiv, produs EGP, prin metoda Analiza gazului, conf SR EN 717/2. SC Akzo Nobel Coatings SRL. Contract nr. 16850/21.11.2013. Coordonator: Conf.dr.Zeleniuc Octavia.

2014

Project ID: WOOD - "Clustering knowledge, Innovation and Design in the SEE WOOD sector" - Activitatile 4.3 si 4.4. ADR Centru Alba Iulia. Contract nr. 1339/04.02.2014. Coordonator: Sef lucr.dr.Olărescu Alin
Evaluarea emisiei de formaldehida din placaj de 20 mm grosime, pentru interior, prin metoda Analiza gazului, conf. SR EN 717/2 si incadrarea in clasa E1 de emisie, conform SR EN 636. STRATUSCOM BLAJ SRL. Contract nr. 6868/16.06.2014. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din placaj pentru interior si elemente mulate stratificate, prin metoda Analiza gazului conf. SR EN 717/2 si incadrarea in clasa E1 de emisie, conform SR EN 636. STRATUSCOM BLAJ SRL. Contract nr. 12613/10.10.2014. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din placaj de 12 mm pentru lucrari de interior prin metoda Analiza gazului conf. EN 717/2 si incadrarea in clasa E1 de emisie, conform SR EN636. STRATUSCOM BLAJ SRL. Contract nr. 1580/10.02.2014. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea continutului de formaldehida din "Fete de usi pentru interior-semifabricat MDF", prin metoda cu perfomator. Asociatia de standardizare din Romania – ASRO. Contract nr. 671/20.01.2014. Coordonator: Conf.dr.Zeleniuc Octavia
Analizarea materialului lemnos utilizat la restaurarea cetatii Feldioara si determinarea unor proprietati fizico-mecanice in vederea incadrarii in clase de calitatespecifice normelor in vigoare. SC EURAS SRL Satu Mare . Contract nr. 12375/08.10.2014. Coordonator: Conf.dr.Zeleniuc Octavia
Determinarea emisiei de formaldehida din panouri stratificate din fag in structuri diferite, incleiate cu diversi adezivi, prin metoda Analiza gazului" , conf.SR EN 717/2. SC Akzo Nobel Coatings SRL . Contract nr. 3147/17.03.2014. Conf.dr.Zeleniuc Octavia .

2015

Proiectare de mobilier inovativ din lemn masiv cu finisaje bio/ecologice şi proiectarea infrastructurii de producție. Valoare grant: 49 822 lei; finanţator: BIOMOBILA SRL, contract nr. 4917/28.04.2015 – Coordonator: Prof.dr.ing. Coşereanu
Cercetări privind îmbunătăţirea tehnologiei şi realizarea de produse cu performanţe funcţionale îmbunătăţite pentru S.C. Holzindustrie Schweighofer BACO S.R.L (2015-2016). Coordonator: Prof.dr.Ispas Mihai.

2016

Cercetări privind utilizarea tehnicii de taiere cu laser la fabricarea produselor din lemn. S.C. NORD ARIN Prod S.R.L. Contract nr:5485 18.05.2016. Preioada derulare 2016. Valoare: 4166 lei. Coordonator: Conf.dr.Brenci Luminita
Cercetări privind îmbunătăţirea peocesului de producţie pentru societateea NORD ARIN PROD S.R.L. Contract nr. 13747/19.10.2016. Perioada derulare 2016-2019. Valoare 59466 lei. Coordonator: Conf.dr.Brenci Luminita.

2017

Etnovember 2017. Proiect cultural. Finantator: Primaria Municipiului Brasov. Valoare 29520 lei. Coordonator: Sef lucr. dr.Alin M.Olares.

2018

Teste ale brichetelor din biomasa vegetală. S.C. Ferma la bunici S.R.L.. Contract nr. 15126/29.10.2018. Coordonatorː Sef lucr.dr.ing. Spîrchez Cosmin
Investigarea ştiințifică în scopul restaurării bunului cultural Ușă împărătească- sec XIX, din colecția Muzeului Codlea, Contract 15903/31.10.2018, Beneficiar: Primăria Municipiul Codlea, Coordonator: Prof. dr. Timar Maria Cristina.
Etnovember 2018. Proiect cultural nr. 84/21.09.2019 (PMBv), nr.10311/10.02.2017 (UTBV). Finantator: Primăria Municipiului Braşov, prin programul guvernamental Dezvoltare locală - domeniul Cultură. Valoare totală: 67721,24 lei. Finanțare nerambursabilă PMBv: 44305,96 lei. Contribuție proprie UTBV: 23415,28 lei. Coordonator: Conf. dr. Alin M. Olărescu.

2019

Teste calorice ale peleților din coceni de porumb. S.C. COMERȚ BATU S.R.L.. Contract nr. 3331/01.04.2019. Coordonatorː Sef lucr.dr.ing. Spîrchez Cosmin.
Teste comparative de elasticitate ale componentelor produselor de mobilier. S.C. COROM EXPORT S.R.L. Contract nr. 7020/21.07.2019. Coordonatorː Sef lucr.dr.ing. Spîrchez Cosmin

Evaluarea emisiei de formaldehidă din materiale compozite din lemn, prin metoda camerei de 1mc. Contract nr. 6800/25.06.2019-2020, Ad nr. 15649/05.12.2019. Beneficiar. KRONOSPAN TRADING S.R.L., Coordonator: Conf.dr. Octavia Zeleniuc
Ameliorarea potențialului productiv şi de adaptare al pădurilor de molid prin promovarea proveniențelor valoroase, a arborilor ideotip, precum şi prin creșterea numărului de surse de semințe genetic ameliorate – Determinarea unor rezistențe mecanice pentru caracterizarea lemnului de molid comun (Picea abies) şi molid cu coroană îngustă (Picea abies pendula). Contract Nr. 4327/23.04.2019. Perioada derulare: 2019. Valoare: 21420 lei. Cordonator: Şef lucr.dr.ing. Mihaela Porojan.
Etnovember 2019. Proiect cultural nr. 78/26.09.2019 (PMBv), nr.11555/01.10.2017 (UTBV). Finantator: Primăria Municipiului Braşov, prin programul guvernamental Dezvoltare locală - domeniul Cultură. Valoare totală: 80907,47 lei. Finanțare nerambursabilă PMBv: 47788,48 lei. Contribuție proprie UTBV: 33118,99 lei. Coordonator: Conf. dr. Alin M. Olărescu

2022ː

Testarea brichetelor din paie și rumeguș. S.C. SERVICE ACUMULATOR S.R.L. Contract nr. 14660/17.10.2022. Coordonatorː Sef lucr.dr.ing. Spîrchez Cosmin

Brevete de inventie

2011

Coşereanu, C., Lunguleasa, A., Lica, D., Cismaru, M., Porojan, M., Brenci L.M., Iacob, M., Mihailescu, C. (2011) – „Manufacturing method of ECOLOGICAL PLYWOOD comprises three technical veneer layers”. Patent no. RO127158-A0
Lunguleasa, A. (2011) - „Metodă şi dispozitiv pentru determinarea coeficientului de compactare al brichetelor lignocelulozice”. CBI A/00458/12.05.2011
Croitoru, C., Paţachia, S.F., Lunguleasa, A. (2011) - „Soluţii de impregnare a lemnului, pe bază de polimeri naturali, metoda de obţinere şi procedeu de aplicare”. CBI A/00577/20.06.2011

2012

Coşereanu, C., Lăzărescu, C., Lica, D., Lunguleasa, A., Budău, G., Cismaru, I., Fotin, A., Sova, D., Iacob, I. (2012) - „Plăci compozite termoizolante cu densitate mică, medie şi mare pentru construcţii şi procedeu de obţinere. Iaşi. CBI A/01059/24.10.
Cismaru, I., Toţu, I., (2012) - „Maşină de prelucrat simultan două înfăşurări la o torsadă cu pas constant” . CBI A/00468/22.06.12
Cismaru, I., Toţu, I., (2012) - „Maşină de prelucrat torsade cu pas variabil prin procedeul traiectoriei materializate” . CBI A/00469/22.06.12
Cionca, M. C., Gurău, L., Olărescu, A., Zeleniuc, O., (2012) – „Panel, has transverse strips, formed of linear blocks carried out from prismatic semifinished items, manufactured from branches by using ecological adhesive”. Patent Number: RO123471-B1. Patent Assignee: UNIV BRASOV TRANSILVANIA (UYBR-Non-standard).
Petrovici, V., Varodi, A., Cazacu, G., Zeleniuc, O., Udrea, S.N., David, K.J., (2012) - „Adhesive composition based on mixed furan resin with furfuryl alcohol and classic urea resin”. Patent number RO 125023- B1 Patent Assignee: Transilvania University of Brasov.

2013

Lüdtke, J., Welling, J., Thömen, H., Barbu, M.C. (2013) - Lightweight wood-based boardsand process for producing of it. New Zealand letters patent nr. 578195 Lüdtke, J., Welling, J., Thömen, H., Barbu, M.C. (2013) – „Lightweight wood-based boardsand process for producing of it”. Indonesian patent ID P0033156
Thömen, H., Welling, J., Barbu, M.C., Lüdtke, J. (2013) – „Lightweight wood-based boardsand process for producing of it”. Australian standard patent 2007332593. Patent acts 1990
Cismaru, I., (2013) - “Maşină de prelucrat torsade cu pas variabil prin traiectorie generată cinematic”. CBI A/00860/23.11.12 (BI RO128276).
Cismaru, I., Toţu, I., (2013) -“Maşină de prelucrat simultan două torsade cu pas constant” . CBI A/00863/23.11.12 (BI RO128277)
Coşereanu, C., Budău, G., Lunguleasa, A., Lica, D. (2013) - „Brichete ecologice, obţinute din stuf şi procedeu de obţinere”. CBI A/00470/22.06.12(BI RO 128746)
Olărescu, A., Cionca, M.C., Bădescu, L. .M., Gurău, L., Câmpean, M., (2013) - „Panou şi procedeu de obţinere”. CBI A/00279/05.04.13(BI RO128819)
Lunguleasa, A., Grîu (căs. Dobrev), T. (2013) - „Procedeu de determinare a puterii calorice a biomasei lemnoase folosind bomba calorimetrică cu soft propriu de lucru”. CBI A/00339/07.05.13 (BI RO129020)
Olărescu, A., Cionca, M.C., Bădescu, L.A.M., Gurău, L., Câmpean, M. (2013) – „Panel, which is obtained from timber cut from thin sessile oak trunks resulting from forestry thinning operations”. Patent Number(s): RO128819-A0.
Olărescu, A., Bădescu, L. A. Cionca, M. C. (2013) – “Panel manufacturing Method, involves exploitation of solid wood of small dimensions resulting as consequence of primary and secondary wood working processes”. Patent number: RO128820-A0. Patent Assignee: UNIV BRASOV TRANSILVANIA (UYBR-Non-standard).
Olărescu, A., Cionca, M. C., Bădescu, L. A., Gurău, L., Câmpean, M. (2013) –„Panel, which is obtained from timber cut from thin sessile oak trunks resulting from forestry thinning operations”. Patent Number: RO128819-A0. Patent Assignee: UNIV BRASOV TRANSILVANIA (UYBR-Non-standard).
Olărescu, A., Cionca, M. C., Bădescu, L. A., Muscu, I. (2013) – „Process for preparing semi-rigid structural element, involves cutting off wastes to desired length with additional oversizing, forming packet, assembling packet with flexible connection elements”. Patent Number: RO128821-A0. Patent Assignee: UNIV BRASOV TRANSILVANIA (UYBR-Non-standard).

2014

Kain, G., Barbu M.C., Petutschnigg, A. (2014) – „Dämmplatten aus Baumrinde”. Österreichischen Pantentamt AT 51 2707 81 2014-07-15, Wien
Grîu (căs. Dobrev), T. , Lunguleasa, A., Spârchez, C. (2014) - „Procedeu de evaluare a calităţii şi a indicelui de marketabilitate pentru brichete lignocelulozice” . CBI A/00827/11.11.13 (BI RO 129676 A0)
Lunguleasa, A., Coşereanu, C., Dobrev, T. (2014) – „Process for increasing thermal power of sawdust briquettes, sorting sawdust and ensilaging into silage, treating within torrefaction
installation, drying, storing sawdust into silage, and briquetting in briquetting machine”. Patent Number(s): RO129646-A0

2015

Zeleniuc, O., Brenci, L., Coşereanu, C., Fotin, A., Lica, D., Budău, G., Lunguleasa, A., Apostu, I., (2015) - „Panou tristratificat din particule şi coji de seminţe de floarea soarelui pentru utilizări în interior şi procedeu de obţinere”. CBI A/00889/19.11.14 (BI RO 130258 A0).
Coşereanu, C., Lica, D., Brenci, L., Fotin, A., Zeleniuc, O., Lunguleasa, A., Budău, G., Apostu, I., (2015) - „Plăci ecologice din deşeuri de floarea soarelui destinate placărilor exterioare şi procedeu de obţinere”. CBI A/00888/19.11.14 (BI RO 130259 A0

2017

Ludtke J, WellingThoemen J, H, Barbu MC.2017 EP 2 117 792 B1: Lightweight wood-based boards and process for producing of it, Patentblatt 2017/18
Lunguleasa, A. Metodă şi dispozitiv pentru determinarea coeficientului de compactare al brichetelor lignocelulozice. Nr.126787
Ionescu Constantin, Lunguleasa Aurel. Process for consolidation-restoration and monitoring of cultural heritage wooden-support objects, RO131858 (A0) ― 2017-05-30

2019

Cosereanu, C., Lica, D., Brenci, L.M., Fotin, A., Zeleniuc, O., Lunguleasa, A., Budau, G., Apostu I. (Prutul S.A. – Braila). Placa ecologica din deseuri de floarea soarelui destinate placarilor exterioare si procedeu de obtinere. Nr. Brevet.130259

2021

Lunguleasa, A., Dobrev, T., Procedeu de determinare a puterii calorifice a biomasei lemnoase folosind bomba calorimetrica cu soft propriu de lucru. Nr. Brevet RO 129020 B1.
Lunguleasa, A., Cosereanu, C., Dobrev, T. Procedeu de creștere a puterii calorifice pentru brichetele din rumeguș. Nr. Brevet RO 129646 B1.

2022

Balea, G. Coşereanu, C., Lunguleasa, A., Zeleniuc, O. Rețete adezive pe baza de lignosulfonat de magneziu oxidat, utilizate la realizarea plăcilor din aşchii de lemn cu conținut redus de formaldehida şi procedeu de obținere. Nr. Brevet RO 137109A0.
Lunguleasa, A., Spirchez, C., Coșereanu, C., Brenci, L. Dispozitiv si procedeu pentru determinarea rezistentei la forfecare a peletilor lemnosi. Nr. Brevet RO 130786 B1.

Articole ȋn reviste indexate ISI si BDI

2011

Timar, M.C. Tuduce Traistariu, A.A., Patachia, S., Croitoru, C. (2011) - An investigation of consolidants penetration in wood. Part 2: FTIR spectroscopy. PRO Ligno, 7(1): 25-38
Olărescu, A., Campean M., Gurau, L. (2011) - Effect of Heat Treatment Upon Dimensional Stability, MOE and MOR of Thin (Dmax =16 cm) Sessile Oak Wood. Pro Ligno, 7(3): 29-38
Gurau, L., Mansfield-Williams, H., Irle, M. (2011) - Evaluating the Roughness of Sanded Wood Surfaces. Book Chapter 6., 51 pages. In: Wood Machining. Edited by J. Paulo Davim, University of Aveiro, Portugal. ISBN: 9781848213159. pp.288, Publishing house: ISTE-Wiley (UK).
Zeleniuc, O. (2011) - The future of timber in the view of eco-products manufacturing . In Proceedings on the 9th International Conference “Challenges in Higher Education and Research in the 21-st Century”, Vol.9. June 5-8 2011, Sozopol, Bulgaria Heron Press Sofia. ISBN: 878-954-580-308-6, pp. 290-294.
Cismaru, I., Brenci L.M., Coşereanu, C (2011) - Permanent testing of the processing acuracy - a basic component of tehnological management. 7th International Conference on Management of Technological Changes. Published in: Management of Technological Changes, Book 2 Pages: 565-568
Coşereanu, C., Budău, G., Lica, D., Lunguleasa, A., Gheorghiu, C.R. (2011). Technological Potential of Reed as Biomass for Briquetting, ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL 10(8), 1127-1132, ISSN 1582-9596.
Budău, G., Câmpean, M., Coşereanu, C., Lica, D. (2011) – Reed-plant Biomass - as renewable and low-polluting energy resource. ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL. ISSN 15829596
Lunguleasa. A. (2011) - Compaction coefficient of wooden briquettes used as renewable fuel. Environmental engineering and management journal. ISSN 15829596
Tuduce A.A., Timar, M.C., Sandu, I., Campean, M. (2011) - Influence of two cold immersion treatments upon the consolidant uptake and its distribution into the wooden structure. Journal of Int. Science Publications: Materials, Methods and Technologies Vol. 5 Part 2, pp. 201-212. ISSN 1313-2539
Szmutku, B., Campean, M., Porojan, M., Sandu, I. (2011) - SEM applications for the study of modifications in wood cell membrane. Journal of Int. Science Publications: Materials, Methods and Technologies Vol. 5 Part 1, pp. 363-374. ISSN 1313-2539
Barbu, M.C. (2011) - 1st Serbian Forestry Congress “Future with Forests”. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 1, pag. 71-73
Barbu, M.C. (2011) - Thanks to high economic rate, Serbia is so called the “Balkan Tiger”. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 1, pag. 60-66
Barbu, M.C., Matan, N. (2011) - International Wood Academy under flooding code in Thailand. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 2, pag. 66-68
Barbu, M.C. (2011) - Thailand – The Siam´s revival through forest plantations. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 2, pag. 56-65
Barbu, M.C. (2011) - Oregon State: King of forest products in the far west of the USA. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 3, pag. 59-67
Barbu, M.C. (2011) - Sustainable development and the role of the forest products industry: The 65th International Convention of the Forest Products Society. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 3, pag. 68-69
Barbu, M.C. (2011) - Challenges and opportunities in wood science education: 54th International Convention of Society for Wood Science and Technology. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 3, pag. 69-70
Barbu, M.C. (2011) - Current developments in the forestry and wood industry. ProLigno, ISSN 1841-4737, Vol. 7, Nr. 4, pag. 111-124.
Ispas, M., Brenci, L., Campean, M. (2011) - Experimental studies on the rougnhess of thermal wood machined by CNC. PRO LIGNO ISSN 1841-4737, Vol. 7(4). Pag. 59-70
Brenci, L.M., Cismaru, I., Coşereanu, C. (2011) - Experimental Research upon the Quality of the Sanded Surfaces of Some Decorative Composite Panels. PRO LIGNO ISSN 1841-4737. Vol. 7(2). Pag. 21-29
Olărescu, C, Coşereanu, C., (2011) - Research on the Thermal Insulation Potential of Some Composites Made of Biodegradable Materials, PRO LIGNO , ISSN 1841-4737. Vol. 7(3). Pag. 54-58
Stanciu, M.D., Curtu, I., Cosereanu, C., Vasile, O, Olărescu, C., (2011) - Evaluation of Absorption Coefficient of Biodegradable Composite Materials with Textile Inserts, Romanian. Journal of Acoustics & Vibration 8 (2), ISSN: 1584-7284.
Tuduce A.A., Timar, M.C., Campean, M. (2011) - Studies upon penetration of Paraloid B72 into poplar wood by cold immersion treatments. BULLETIN OF THE TRANSILVANIA UNIVERSITY OF BRASOV - SERIES II: FORESTRY. WOOD INDUSTRY. AGRICULTURAL FOOD ENGINEERING Vol 4 (53), Nr. 1, pp. 81-88. 2065-2135,2065-2143(CD)
Szmutku, B., Campean, M., Sandu, I. (2011) - Microstructure modifications induced in spruce wood by freezing. PRO LIGNO. ISSN 2069-7430. Vol. 7(4):26-31
Campean, M., Gurau, L., Olarescu, C. (2011) - Effect of Heat Treatment upon Dimensional Stability and Static Bending Strength of Sessile Oak Wood. PRO LIGNO. ISSN 2069-7430. Vol. 7(2):46-55
Tuduce, A.A., Campean, M., Timar, M.C. (2011) - Compatibility Indicators in Developing Consolidation Materials with Nanoparticle Insertions for Old Wooden Objects. International Journal of Conservation Science 1(4):219-226. ISSN: 2067-533X
Sova, D., Postelnicu, A., Bedelean, B. (2011) - Assessment of drying quality by use of Kirpichev number. International Wood Product Journal Vol. 1(2)
Bedelean, B., Sova, D. (2011) - Investigations into possibility of minimizing aerodynamic resistance of kiln drying stacks. International Wood Product Journal Vol.1(2)

2012

Timar, M.C., Gurau, L., Porojan, M. (2012) - Wood species identification, a challenge of scientific conservation. International Journal of Conservation Science, 3(1): 11-22
Timar, C., Beldean, E., Zeleniuc, O., Varodi. A. (2012) - O introspectiva a degradarii lemnului de fag (Fagus sylvatica L.), expus timp indelungat in exterior, deasupra solului : Partea 1: Tipuri de degradare si influenta tratamentelor de suprafata, relevate prin evaluare nedistructiva dupa 7 ani de expunere, PRO Ligno, 8 (2): 37-52
Timar, C., Beldean, E., Zeleniuc, O., Varodi. A. (2012) - O introspectiva a degradarii lemnului de fag (Fagus sylvatica L.), expus timp indelungat in exterior, deasupra solului. Partea a 2-a: Evolutia in timp a degradarii, evaluarea distructiva dupa 7 ani si influenta situatiei in expunere, PRO Ligno, 8 (3): 53-67
Tuduce Traistaru, A.A., Sandu, I.C.A., Timar, M.C., Dumitrescu, G.L., Sandu, I. (2012) - SEM-EDX, Water Absorption and Wetting Capability Studies on Evaluation of the Influence of Nano-Zinc Oxide as Additive to Paraloid B72 Solutions Used for Wooden Artifacts Consolidation. Microscopy Research and Technique 11/2012, DOI: 10.1002/jemt.22155, 1,79 Impact Factor
Tuduce Traistaru, A.A., Timar, M.C., Campean, M., Croitoru, C. (2012) - Paraloid B72 versus Paraloid B72 with Nano ZnO Additive as Consolidants for Frail Wood, Materiale Plastice, 49 (4): 293-300, 0,387 Impact Factor
Glowacki, R., Barbu, M.C., Wijck van, J. Chaowana, P. (2012) - The use of coconut husk in high pressure laminate production. Journal of Tropical Forest Sciences, Forest Research Institute Malaysia, ISSN 0128-1283, No. 24 (1), pag. 27-36
Kain, G., Teischinger, A., Musso, M., Barbu, M.C., Petutschnigg, A. (2012) - Stoffliche Rindennutzung in Form von Dämmstoffen. HolzTechnologie no.53/4, DRW-Verlag, ISSN 0018-3881, pag.31-37
Kain, G., Barbu, M.C., Teischinger, A., Musso, M., Petutschnigg, A. (2012) - Substantial bark use as insulation material. Forest Products Journal 62 (6): 480-487
Curtu, I., Stanciu, M.D., Coşereanu, C., Ovidiu, V. (2012) - Assessment of acoustic properties of biodegradable composite materials with textile inserts, Materiale Plastice 49(1), 68-72, ISSN: 0025-5289
Câmpean, M., Marinescu I., (2012) - Solar systems for wood drying revista:ENVIRONMENTAL ENGINEERING AND MANAGEMENT JOURNAL ISSN 15829596
Tuduce, A.A., Timar, M.C., Câmpean, M., Croitoru, C., Sandu, I. (2012) - Paraloid B72 Versus Paraloid B72 with Nano-ZnO Additive as Consolidants for Wooden Artefacts. Revista Materiale Plastice. ISSN 00255289
Barbu, M.C. 2012) - Turkey – a growing wood sector due to real estate development. ProLigno, ISSN 1841-4737, Vol. 8(1). Pag. 52-65.
Barbu, M.C., Salca, E., Tudor, E. (2012) - The 1st Worshop “Basics for Chemistry of Wood Surface Modification”. ProLigno, ISSN 1841-4737, Vol. 8(2). Pag. 100-102.
Barbu, M.C. (2012) - Forest resources in the far West of Europe. Portugal: Sustainable development and world leader thanks to cork. ProLigno ISSN 1841-4737, Vol. 8(3). Pag. 89-96.
Barbu, M.C. (2012) - Participation record at IUFRO All Division 5 “Forest products” Conference in Estoril/Lisbon, Portugal. ProLigno ISSN 1841-4737, Vol. 8(3). Pag. 97-101.
Brenci, L.M., Coşereanu, C., Cismaru, I., Fotin, A. (2012) - Research of the behaviour of the MDF door frames after immersion in water.PRO LIGNO ISSN 2069-7430, Vol: 8(2). Pag. 80-88
Cosereanu, C., Lazarescu, C., Olarescu, C., Laurenzi, W., (2012) - Ecological Solutions for Low Energy Building Walls. PRO LIGNO ISSN 2069-7430 Vol. 8(1). Pag. 28-34
Lica, D., Coşereanu, C., Budău, G., Lunguleasa, A., (2012) - Characteristics of Reed Briquettes – Biomass Renewable Resource of the Danube Delta. PRO LIGNO ISSN 2069-7430. Vol. 8(1). Pag. 44-51
Brenci, L.M, Coşereanu, C., Fotin, A., (2012) - Experimental research concerning the wear of the milling edges upon the quality of wood surfaces, Scientific Research & Education in the Air Force-AFASES 1, BDI: Google Scholar, ISSN: 2247-3173.
Olarescu, C., Campean, M. (2012) - Effect of heat treatment upon dimensional stability and mass loss of black pine and spruce wood originating from mature trees vs. Thinnings. PRO LIGNO. ISSN 2069-7430. Vol. 8(4):44-57
Gurau, L., Campean, M., Olarescu, C., Porojan, M., Marton (2012) - The effect of the heat treatment of sessile oak wood (Quercus petrea l.) from young trees on the properties of panels with transversal grain. PRO LIGNO. ISSN 2069-7430. Vol. 8(2):53-67
Szmutku B., Campean, M., Laurenzi, W. (2012) - Influence of cyclic freezing and thawing upon spruce wood properties. . PRO LIGNO. ISSN 2069-7430. Vol. 8(1):35-43
Bedelean, B., Sova, D. (2012) - Performance assesment of a laboratory drying kiln designed with and without baffles. Pro Ligno. ISSN 2069-7430. Vol. 8(2)
Lăzărescu, C., Bedelean, B., Avramidis, S. (2012) - Heating characteristics of softwoods in a high frequency field. Pro Ligno. ISSN 2069-7430. Vol. 8(4)

2013

Gurau, L., Mansfield-Williams, H., Irle, M. (2013) - The influence of measuring resolution on the subsequent roughness parameters of sanded wood surfaces. European Journal of Wood and Wood Products (Holz als Roh und Werkstoff). 1/2013,71(1):5-11, Ed. Springer DOI: 10.1007/s00107-012-0645-4;
M.B. Szmutku, V. Popa, Campean, M. (2013) Experimental Study Regarding the Freezing and Thawing Dynamics of Spruce Wood, PRO LIGNO 9(1):50-60.
Zeleniuc, O., Bedelean, B. (2013) - Formaldehyde emission from wood based panels an environmental issue. ProLigno, Vol 9 (4), pp. 498-503,
Kain, G. , Barbu, M.C., Hinterreiter, S., Richter, K., Petutschnigg, A. (2013) - Using bark as heat insulation material. BioRessources 8(3), pag. 3718-3731
Zeller, F., Barbu, M.C., Iwakiri, S. (2013) - Parica (Schizolobium amazonicum) and embauba (Cecropia sp.) as new raw materials for particleboards. European Journal for Wood Products 71: 823–825
Shalbafan, A., Benthien, J., Welling, J., Barbu, M.C. (2013) - Flat pressed wood plastic composites made of milled foam core particleboard residues. European Journal for Wood Products 71: 805–813
Szmutku B., Campean, M., Porojan, M. (2013) - Strength reduction of spruce wood through slow freezing. Eur. J. Wood Prod. (2013) 71(2):205-210. ISSN: 0018-3768 (print version) ISSN: 1436-736X (electronic version)
Barbu, M.C. (2013) - China - The Most Important Player in the Global Trade of Wood Based Products, ProLigno ISSN 1841-4737, Vol. 9, Nr. 2, pag. 62-75
Barbu, M.C. (2013) - Forest and Wood Industry in Romania. ProLigno ISSN 2069-7430, Vol. 9, Nr. 4, pag.3-6
Barbu, M.C. (2013) - Changes in the European Wood Science Education. ProLigno ISSN 2069-7430, Vol. 9, Nr. 4, pag.28-38
Young, T., Barbu, M.C., Petutschnigg, A. (2013) - The Evolution of Knowledge in Forest Products Manufacturing. ProLigno ISSN 2069-7430, Vol. 9, Nr. 4, pag. 22-27
Weissensteiner, J., Barbu, M.C. (2013) - Cross Laminated Timber – European Experiences. ProLigno ISSN 2069-7430, Vol. 9, Nr. 4, pag.69-72
Kain, G., Heinzmann, B., Barbu, M.C., Petutschnigg, A. (2013) - Softwood Bark for Modern Composites. ProLigno ISSN 2069-7430, Vol. 9, Nr. 4, pag.460-468
Boran, S. , Dönmez-Cavdar, A. , Barbu, M.C. (2013) - Evaluation of Bamboo as Furniture Material and its Furniture Designs. ProLigno ISSN 2069-7430, Vol. 9, Nr. 4, pag.811-819
Brenci, L.M., Coşereanu, C., Cismaru, I., Fotin, A., Pop, M.,(2013) - New Composite Structures Designed for Building Acoustic Insulation. PRO LIGNO ISSN 2069-7430. Vol. 9(4). Pag. 483-490
Fotin, A., Cismaru, I., Coşereanu, C., Brenci, L.M. (2013) - Influence of the processing parameters upon the birch wood surface PRO LIGNO ISSN 2069-7430. Vol. 9(4). Pag. 760-770.
Fotin, A., Coşereanu, C., Brenci, M.L. (2013) - Assessment of the final quality of the sanded surfaces in case of birch wood. ProLigno ISSN 2069-7430. Vol.9(3). Pag. 13-25.
Brenci, L.M., Coşereanu, C., Fotin, A., Vasilache, A. (2013) - Research on the Thermal Conductivity of Composites Made of Ecological Fibers. PRO LIGNO ISSN 2069-7430. Vol. 9(3). Pag. 34-41.
Fotin, A., Coşereanu, C., Brenci, L.M. (2013) - Assessment of the Final Quality of the Sanded Surfaces in Case of Birch Wood. PRO LIGNO ISSN 2069-7430. Vol. 9(3). Pag. 13-25.
Coşereanu, C., Lăzărescu, C., (2013). Determination of the Water Resistance of the Wood Textile Reinforced Composites, ProLigno Vol.9 Nr.4, 477-482,
Curtu, I., Dates, R.N., Stanciu, M.D., Coşereanu, C. (2013) - Modeling rheological behavior of the bolted joints used in wood constructions, ProLigno, ISSN 2069-7430. vol. 9, nr.4, BDI: CABI, ISSN: 2069-7430.
Szmutku, Campean, M., Porojan, M. (2013) - Upon the Drying of Frozen Spruce Timber. PRO LIGNO ISSN 2069-7430. 9(4):700-708
Szmutku, B., Nemeth, Campean, M. (2013) - Effect of Different Freezing Conditions Upon the Diffusion Coefficient of Spruce Wood. PRO LIGNO. ISSN 2069-7430. Vol 9(3):3-12
Olărescu C., Campean, M., Porojan, M. (2013) - Effect of Heat Treatment Upon the Compression Strength of Black Pine and Spruce – A Comparison Between Wood Originating From Mature Trees Vs. Thinnings. PRO LIGNO ISSN 2069-7430. Vol 9(2):50-61
Szmutku, B., Popa V., Campean, M. (2013) - Experimental Study Regarding the Freezing and Thawing Dynamics of Spruce Wood. PRO LIGNO. ISSN 2069-7430. Vol 9(1):50-60
Szmutku, M., Câmpean, M., Bedelean, B. (2013) - Upon the drying of frozen spruce timber. PRO LIGNO. ISSN 2069-7430. Vol. 9(4)
Sova, D. Bedelean, B. (2013) - Statistical analysis of simulated wood drying schedules concerning drying time reduction in an experimental kiln. Pro Ligno. ISSN 2069-7430. Vol. 9(4)
Bedelean, B., Șova, D. (2013) - Revealing the relation between independent variables and drying time implemented in Torksim by means of artificial neural networks: A preliminary study. Pro Ligno. ISSN 2069-7430. Vol. 9(4)
Gherghişan, M.A., Cismaru, I. (2013) - Research Concerning the Influence of Matrix in Hemp Hurds Composites on Thermal Conductivity. Pro Ligno. ISSN 2069-7430. Vol. 9(3) :26-33

2014

Gurau, L., Mansfield-Williams, H., Irle, M. (2014) - Convergence of the robust Gaussian regression filter applied to sanded wood surfaces. Wood Science and Technology. ISSN 0043-7719. DOI 10.1007/s00226-014-0663-y.
Gurau, L. (2014) - The influence of earlywood and latewood upon the processing roughness parameters at sanding. PRO Ligno, Vol. 10, No.3. September 2014, Online ISSN 2069-7430, ISSN-L 1841-4737.
Liu, X.Y, Timar, M.C., Varodi, A. (2014) - A preliminary study of three finishing materials for traditional Chinese furniture. Advances in Materials Physics and Chemistry, 2014, 4, 85-92.
Laurenzi, W. (2014) - Can active experiments be used in woodworking processes? PRO Ligno, Vol. 10, No.3. September 2014, Online ISSN 2069-7430, ISSN-L 1841-4737. Ed. Univ. Transilvania Brasov,
Griu (Dobrev), T., Lunguleasa, A., Bedelean, B., Spirchez, C. (2014) - The compressive strength as one of the main properties of wood biomass. Ciencia e Tecnica Vitivinicola, Portugal, vol.29, nr.7.
Spirchez, C., Lunguleasa, A., Cosereanu, C., Griu (Dobrev), T. (2014) - Calorific power of composite materials biomass in order to obtain solid fuels, Ciencia e Tecnica Vitivinicola, Portugal, vol.29, nr.9, 2014.
Ciobanu, V., Ciobanu, CIOBANU, D., Zeleniuc, O., Dumitrascu, A.E., Lepadatescu, B., Iancu, B. (2014) - The influence of speed and press factor on oriented strand board performance in continuous press, BioResources. 9(4), 6805-6816.
Akrami, A., Barbu, M.C., Frühwald, A. (2014) - Characterization of properties of oriented strand boards from beech and poplar. European Journal of Wood and Wood Products, 72(3): 393-398
Akrami, A., Barbu, M.C., Frühwald, A. (2014) - The effect of fine strands in core layer on physical and mechanical properties of oriented strand boards (OSB) made of beech (Fagus sylvatica) and poplar (Populus tremula). European Journal of Wood and Wood Products, 72(3): 521-525
Kain, G., Güttler, V., Barbu, M.C., Petutschnigg, A., Richter, K., Tondi, G. (2014) - Density related properties of bark insulation boards bonded with tannin hexamine resin. European Journal of Wood and Wood Products, 72(4):417-424
Akrami, A., Frühwald, A., Barbu, M.C. (2014) - Supplementing pine with European beech and poplar in oriented strand boards. Wood Material Science and Engineering
Olărescu, M.C., Câmpan, C., Ispas, M., Coşereanu, C. (2014) - Effect of thermal treatment on some properties of lime wood. European Journal of Wood and Wood Products. Vol 27(4). Pages: 559-562. DOI: 10.1007/s00107-014-0809-5
Olărescu, C., Campean, M, Ispas, M., Olărescu, A. (2014) – Dimensional stabilization of wood originating from small-diameter trees through heat treatment. BioResources. ISSN:19302126
Croitoru, C., Paţachia S., Lunguleas, A. (2014) - A mild method of wood impregnation with biopolymers and resins using 1-ethyl-3-methylimidazolium chloride as carrier. Chemical Engineering Research and design
Olarescu C., Campean. M. , Olarescu. A. (2014) - Dimensional stabilization of wood originating from small-diameter trees through heat treatment. BioResources 9(3), Pag: 4844-4861. DOI: 10.15376/biores.9.3.4844-4861. ISSN: 1930-2126
Cismaru, I., Gheghişan, A.M. (2014) – Influence exerted by the structural matrix of thhe composite boards made og hemp hurds, on the thermal-transfer-factor. Materiale Plastice. Vol. 51(3):241-245. ISSN ISSN 00255289
BARBU, M.C. (2014) - Japan: housing sector requires 40% from wood demand. ProLigno ISSN 2069-7430, Vol. 10, Nr. 1, pag.54-61
BARBU, M.C. (2014) - Portugal in March: European Conference on Wood Modification and Cost Training School on Decorative Laminates. ProLigno ISSN 2069-7430, Vol. 10, Nr. 2, pag.46-47
Brenci, L.M., Cismaru, I., Fotin, A., Zeleniuc, O. (2014) - The influence of ecological materiales embendded into composite upon the thermal insulating capacity. PRO LIGNO ISSN 2069-7430, 10(4):63-68
Cismaru, I., Brenci, L.M. (2014) - Application of the commissionership system to wood industry-safe and sustainable development way. PRO LIGNO ISSN 2069-7430, 10(2): 34-39
Fotin, A., Brenci, L.M. (2014) - Research on the Optimum Embedment depth of the dowel pins into the particleboard joints. PRO LIGNO ISSN 2069-7430, 10(1): 31-37
Brenci, L.M. (2014) - Integration of the concession-system pylon into the trinomial tower – rapid and efficient path in development management. Review of General Management. 20(2). Pag. 26-35. ISSN 1841-818X
Cismaru, I., Brenci, L.M. (2014) - Complex trinomial system-basis for the management of the socioeconomic development Review of General Management 19(1). Pag. 73-83. ISSN 1841-818X
Coşereanu, C., Lica, D., (2014). Wood - Plastic Composites from Waste Materials Resulted in the Furniture Manufacturing Process, PRO LIGNO Vol.10, nr. 2, 26-33
Diaconu, C.P., Stanciu, M.D., Curtu, I., Doşa, A., Grosaru, F.A., Coşereanu, C. (2014) - Modern Building Structures Used for Military Purposes, Journal of Defense Resources, 117-122, ISSN: 2068-9403
Coşereanu, C., Cismaru, I., (2014) - Complex Ornament Machining Process on a CNC Router, PRO LIGNO. ISSN: 2069-7430Vol. 10(1):22-30,.
Lica, D., Coşereanu, C., (2014) - Investigation on the Properties of Pedunculate Oak Wood Affected by Oak Decline, PRO LIGNO, ISSN: 2069-7430. Vol. 10(4): 69-78.
Coşereanu, C., Lica, D., Curtu, I., Stanciu, M.D., (2014) - Water Resistance of Wood - Plastic Composites Made from Waste Materials Resulted in the Furniture Manufacturing Process, PRO LIGNO ISSN: 2069-7430. Vol. 10( 4):35-39.
Olarescu, C., Campean, C., Varodi. A. (2014) - Colour and dimensional modifications of solid wood panels made from heat-treated spruce wood after three months of outdoor exposure. PRO LIGNO ISSN: 2069-7430. 10(3):46-54
Ispas. M, Câmpean. M. (2014) – Experimental research on sawing frozen wood. BULLETIN OF THE TRANSILVANIA UNIVERSITY OF BRASOV - SERIES II: FORESTRY. WOOD INDUSTRY. AGRICULTURAL FOOD ENGINEERING. Vol. 7 (56) No.1. pp 51-58. 2065-2135,2065-2143(CD)
Bedelean, B. (2014) - Comparative analysis between a drying kiln designed with and without top baffles. Journal of the Indian Academy of Wood Science 11 (1) DOI: 10.1007/s13196-014-0115-1
Ispas, M., Gurău, L., Răcăşan, S. (2014) - Study Regarding the Variation of the Thrust Force, Drilling Torque and Surface Delamination with the Feed per Tooth and Drill Tip Angle at Drilling Pre-laminated Particleboard. PRO LIGNO, ISSN: 2069-7430. Vol. 10(4):40-52.
Cismaru, I., Fotin, A. (2014) - Design and Manufacturing of Modular Parquet Flooring in Industrial System. PRO LIGNO, ISSN: 2069-7430. Vol. 10(3):34-45.
Budău, G., Ispas, M., (2014) - Theoretical Clarifications Regarding the Concept of Working Capacity of Wood-Working Machine-Tools. PRO LIGNO, ISSN: 2069-7430. Vol. 10(3): 55-61
Cismaru, I., Brenci, L.M. (2014) - Application of the Commissionership System to Wood Industry–Safe and Sustainable Development Way. PRO LIGNO, ISSN: 2069-7430. Vol. 10(3): 34-39
Fotin, A., Brenci, L.M. (2014) - Research on the Optimum Embedment Depth of the Dowel Pins into the Particleboard Joints. PRO LIGNO, ISSN: 2069-7430. Vol. 10(3): 31-37

2015

Kain, G., Charwat-Pessler, J., BARBU, M.C., Plank, B., Richter, K., Petutschnigg, A. (2015) - Analyzing wood bark insulation board structure using X-ray computed tomography and modeling its thermal conductivity by means of finite difference method. Journal of Composite Materials 1-12
Kain, G., Güttler, V., Lienbacher, B., Barbu, M.C., Petutschnigg, A. Richter, K., Tondi, G. (2015) - Effect of different flavonoid extracts in the optimization of tannin-glued bark insulation boards. Wood and Fiber Science 47(3): 1-12
Kain, G., Barbu, M.C., Richter, K., Plank, B., Tondi, G., Petutschnigg A. (2015) - Use of tree bark as insulation material. Forest Products Journal 65 (3/4):16-25
Rindler, A., Solt, P., Schnabel, T., Barbu, M.C. (2015) - Comparison between HB and HDF made from waste leather. Forest Products Journal 65 (3/4):39-47
Chaowana, P., Barbu, M.C., Frühwald, A. (2015) - Bamboo - a functionally graded composite material. Forest Products Journal 65 (3/4): 48-53
Coşereanu, C., Brenci, L.M., Zeleniuc, O., Fotin, A. (2015) - Effect of particle size and eometry of single-layer and three-layer particleboard made from sunflower seed husks BioResources Journal 10(1):pp 1127-1136. ISSN: 1930-2126
Croitoru, C., Paţachia S., Lunguleas, A. (2015) - New Method of Wood Impregnation with Inorganic Compounds Using Ethyl Methylimidazolium Chloride as Carrier. Journal of wood chemistry and technology ISSN:02773813
Bedelean, B., Lazarescu, C., Avramidis, S. (2015) - Predicting RF Heating Rate During Pasteurization of Green Softwoods Using Artificial Neural Networks and Monte Carlo Method. Wood Research, vol.60 (1), pp.83-94
Szmutku, M., Câmpean, M., Nemeth, R., Bedelean, B. (2015) - Energy consumption in drying of frozen spruce wood. Environmental Engineering and Managament Journal
Cismaru, I., Hadăr, A., Gherghişan, A.M. (2015) – Influence of the structural matrix upon the themal-transfer fator in case of the composie boards of hemp huurds (II). Revista Materiale Plastice. Vol. 52(1): 13-19. ISSN 00255289
Coşereanu, C., Lica, D., Lunguleasa, A., (2015) - Investigation on the quality of briquettes made from rarely used wood species, agro-wastes and forest biomass, PRO LIGNO, ISSN 2069-7430. Vol. 11(1):32-39
Cismaru, I., Brenci, L.M. (2015) - Research Pillar of Trinomial Tower – Catalyst of Sustainable Development. Review of General Management. 21(1). Pag. 5-16. ISSN 1841-818X
Cismaru, I., Brenci, L.M. (2015) - The social pylon within the trinomial tower – logistic and managerial sustainingelement for evolution and development. Review of General Management. 22(2). Pag. 39-54. ISSN 1841-818X
Răcăşan, S., Ispas, M. (2015) - Comparative Study on the Technical Performances of Two Thicknessing Machines. PRO LIGNO, ISSN 2069-7430. Vol. 11(2). Pag. 11-30
Câmpean, M. (2015) - Influence of Moisture Diffusion Rate of Bound Water Upon the Drying Time of Steamed and Unsteamed Beech Wood. PRO LIGNO, ISSN 2069-7430. Vol. 11(2). Pag. 31-38
Cismaru, I., Filipaşcu, M., Turcaş (Diaconu), O.M., Fotin, A. (2015) - Wooden Flooring – Between Present and Future. PRO LIGNO, ISSN 2069-7430. Vol. 11(2). Pag. 39-50

2016

Șova, D., Bedelean, B., Sandu, V., (2016) Application of Response Surface Methodology to Optimization of Wood Drying Conditions in a Pilot-Scale Kiln. BALTIC FORESTRY, Vol. 22, No. 2 (43), Pag.348-356.
Bedelean, B., Muntean, S., Câmpean, M., (2016) Analysis of Drying Kiln Aerodynamics Based on a Full Three-Dimensional Turbulent Numerical Computation. Drvna Industrija, Vol. 67, Nr.1, Pag. 53-64.
Ispas, M., Gurău L., Câmpean, M., Hacibektasoglu, M., Răcășan S., (2016) Milling of Heat-Treated Beech Wood (Fagus sylvatica L.) and Analysis of Surface Quality. BioResources Journal, Vol.11(4), Pag. 9095-9111 ISSN: 1930-2126.
Timar,M.C., Varodi,A., Hacibektasoglu, M., Câmpean, M., (2016) Color and FTIR analysis of chemical changes in beech wood (Fagus sylvatica L.) after light streaming and heat treatment in two different environments. BioResources Journal, Vol. 11(4),8325-8343, ISSN: 1930-2126.
Cerbu, C., Coșereanu, C., (2016) Moisture effects on the mechanical behavior of fir wood flour/glass reinforced epoxy composite. BioResources Journal , Vol. 11(4), Pag. 8364-8385. DOI: 10.15376/ biores.11.4.8364-8385.
Timar,M.C., Gurău L., Varodi,A., (2016) Comparative study of photodegradation of six wood species after short-time UV exposure. Journal Wood Science and Technology, Vol. 50(1), Pag. 135-163 (DOI) 10.1007/s00226-015-0771-3, ISSN 0043-7719.
Spîrchez, C., Lunguleasa, A., Grîu(Dobrev), T., (2016) Testing model for assessment of lignocellulose-based pellets. Wood Research Journal, Vol. 61 (2), pag.331-340.
Grîu, T., Lunguleasa, A., (2016)The use of the White poplar (Populus alba L) biomass as fuel. Journal of Forestry Research, Vol.27 (3), Pag.719-725, ISSN 1993-0607.
Spîrchez, C., Lunguleasa, A., (2016)Shear and crushing strengths of wood pellets. Drewno Journal, vol.59, nr.198, Pag. 87-97, DOI: 10.12841/wood.1644-3985.170.04.
Grîu, T., Lunguleasa, A., (2016) Salix viminalis vs. Fagus sylvatica - Figth for Renewable energy from woody biomass in Romania. Environmental Engineering and Management Journal, Vol.15, No. 2, Pag. 413-420.
Mușat, E.C., Salcă E.A., Dinulică, F., Ciobanu, V. D., Dumitrașcu A.E., (2016) Evaluation of color variability of oak veneers for sorting. BioResources Journal, Vol.11(1), Pag.573-584.
Salcă E.A., Kobori, H., Inagaki, T., Kojima, Y., Suzuki, S., (2016) Effect of heat treatment on colour changes of black alder and beech veneers. Journal of Wood Science, Vol.62(4), Pag.297-304, ISSN 1435-0211.
Salcă E.A., Krystofiak, T., Lis B., Mazela, B., Proszyk, S., (2016) Some coating properties of black alder wood as function of varnish type and applications method. BioResources Journal, Vol.11(3), Pag.7580-7594.
Liu, X.Y., Yi, S.L.,Timar,M.C., Varodi,A., (2016) Effects of ageing on the color and surface chemistry of Paulownia wood (P. elongata) from fast growing crops. BioResources Journal, Vol.11(4), Pag.9400-9420.
Heinzmann, B., Barbu, M.C., (2016) Genauigkeit der fotooptischen Poltervermessung von Industrieholz am Beispiel von FOVEA. JurnalBDI:Forstarchiv, 84. Pag. 194-197 ISSN 0300-4112.
Barbu, M.C., (2016)Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 13: Weißrußland. JurnalBDI:Holztechnologie (1/6). Pag. 52-54.
Barbu, M.C., Paulitsch, M., (2016)Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 14: Nordamerika - Die Lage der Forst - und Holzindustrie. JurnalBDI:Holztechnologie (4/6) Pag. 51-53.
Barbu, M.C., (2016) Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 15: Nordamerika – Holzforschung und Holztechnologie. JurnalBDI:Holztechnologie (5/6). Pag. 53-56.
Barbu, M.C., (2017) Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 16: Kanada. JurnalBDI:Holztechnologie (4/6). Pag. 52-55.
Kain, G., Barbu, M.C., Petutschnigg, A., (2016) Insulation material made from tree bark. JurnalBDI:Unasylva, No. 247/278, Vol 16 Pag. 67-75.
Beldean, E., Timar, M.C., Porojan, M., (2016) Bamboo-a Challenging material for Romanian Engineers. Part 1. Understanding the material. JurnalBDI:Bulletin of the Transilvania University of Brasov, Series II, Vol. 9 (58) No.1, Pag. 29-36.
Beldean, E., Timar, M.C., Porojan, M., (2016) Bamboo-a Challenging material for Romanian Engineers. Part 2. An experimental study on its anatomy and some physical and mechanical properties. JurnalBDI:Bulletin of the Transilvania University of Brasov, Series II, Vol. 9 (58) No.2, Pag. 37-44.
Brenci, L.M., (2016) Eco-Composites Designed for Thermal and Acoustic Insulation of Buildings. JurnalBDI:Bulletin of the Transilvania University of Braşov seria II, vol 9(58) no. 2, Pag, 47-52.
Fotin, A., Lunguleasa, A., Coșereanu, C., Brenci, L.M., (2016) Research on using plywood made from domestic species of wood for longboard manufacturing. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.12 (3), Pag. 34-41
Câmpean, M., Lăzărescu, C., (2016) Considerations upon the drying of oak wood lumber. JurnalBDI:Bulletin of Transilvania University of Brasov, Series II Vol. 9 (58) No.1, Pag. 37-42
Cismaru, I., Coșereanu, C., (2016) Correlation Between Parameters and Geometry in case of Designing Spiral Twist with Variable Pitch. JurnalBDI:PRO LIGNO ISSN 2069-7430, Vol.12 (4), Pag. 30-40.
Lunguleasa, A., Coșereanu, C., Spîrchez, C., Dobrev(Grîu), T., (2016)Calorific Properties of Wastes From Some Exotic Wood Species. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.12 (1), Pag. 51-57.
Spîrchez, C., Lunguleasa, A., Gaceu, L., Grîu, T., (2016) Study on calorific value to wood pellets. JurnalBDI:Jouornal Of Eco AgriTourism, Vol12,nr.2(33) pag.98-102, ISSN1844-8577.
Zeleniuc, O., Standards and Regulations Concerning the Formaldehyde Emissions from Wood Panels. JurnalBDI:Recent vol 17, no 3(49) Pag. 266-21, ISSN 1582 02 46.

2017

Amiandamhen, S. O., Montecuccoli, Z., Meincken, M., Barbu, M. C., Tyhoda, L., (2017) Phosphate bonded wood composite products from invasive Acacia trees occurring on the Cape Coastal plains of South Africa. European Journal of Wood and Wood Products, Vol. 76(2), Pag. 437-444, ISSN 1436-736X.
Kain, G. , Lienbacher, B., Barbu, M.C., Richter K., Petutschnigg, A., (2017) Larch bark insulation board: interactions of particle orientation, physical–mechanical and thermal properties. European Journal of Wood and Wood Products, Vol. 76(2), Pag. 489-498, ISSN 1436-736X.
Bedelean, B., (2017)Optimisation techniques to compare various selected drying schedules for larch timber. European Journal of Wood and Wood Products, Vol.75(6), Pag.939-948. ISSN 1436-736X.
Hacibektasoglu, M., Câmpean, M., Ispas, M., Gurău, L., (2017) Influence of Heat Treatment Duration on the Machinability of Beech Wood (Fagus sylvatica L.) by Planing. BioResources Journal Vol.12(2), Pag. 2780-2791.
Olărescu, M. C., Câmpean, M., Coșereanu, C., (2017)Shape- and dimensional stability of solid wood panels made from heat-treated lime wood strips. European Journal of Wood and Wood Products, Vol.75(3), Pag.467-471. ISSN 1436-736X.
Gurău, L., Irle, M., Câmpean, M., Ispas, M., Buchner, J. (2017) Surface quality of planed beech wood (Fagus sylvatica L) thermally treated for different durations of time. BioResources Journal Vol.12(2), Pag.4283-4301.
Gurău, L., Ayrilmis,N., Benthien, J.T., Ohlmeyer,M., Kuzman, M.K., Răcășan,S., (2017) Effect of species and grinding disc distance on the surface roughness parameters of medium-density fiberboard. European Journal of Wood and Wood Products, Vol.75(3), Pag.335-346. ISSN 1436-736X.
Gurău, L., Petru, A., Varodi, A., Timar, M. C. (2017) The influence of CO2 laser beam power output and scanning speed on surface roughness and colour changes of beech (Fagus sylvatica). BioResources Journal Vol. 12(4), Pag. 7395-7412.
Lunguleasa, A., Spîrchez, C., (2017) Torrefaction Of Lamellar Panels Made Of Oak And Spruce Wood Species. Wood Research Journal Vol. 62(2) Pag. 319-328.
Lunguleasa, A., Spîrchez, C., (2017) Characteristics Of Waste Bark Combustion, Environmental Engineering and Management Journal, Vol.16, Nr. 3,Pag. 685-694.
Spîrchez, C., Lunguleasa, A., Antonaru, A., (2017) Experiments and modeling of the torrefaction of white wood fuel pellets. BioResources Journal Vol. 12(4), Pag. 8595-8611
Salcă,E.A., Krystofiak, T., Lis, B., (2017)Evaluation of selected properties of alder wood as functions of sanding and coating. Coatings Journal,Vol. 7, 176; doi:10.3390/coatings7100176.
Dumitrașcu, A.E., Mușat, E.C., Dumitrașcu, D.I., Ciobanu, V.D., Salcă,E.A., (2017) Influence of sessile oak log characteristics on the efficiency in veneer cutting. BioResources Journal Vol.12(2),Pag. 2579-2591.
Mușat, E.C., Salcă,E.A., Ciobanu, V.D., Dumitrașcu, A.E., (2017) The influence of log defects on the cutting yield of oak veneer. BioResources Journal Vol.12(4),Pag. 7917-7930.
Mitache, M.M., Prună, M., Covic, P., Spîrchez, C., Gaceu, L., Gheorghe, I., Predan, G., Marutescu, L., (2017) Influence of microwave sterilization on the lignocellulosic biowaste streams conversion process using Pleurotus sp. Revista Romanian Biotechnological Letters, vol.22, Nr.6, pag. 13053-13059.
Liu, X.Y., Timar, M.C., Varodi, A.M., Sawyer, G., (2017) An investigation of accelerated temperature-induced ageing of four wood species: colour and FTIR. Wood Science and Technology, Vol 51(2), Pag.357-378, ISSN 1432-5225.
Mantanis G.I., Athanassiadou E.Th., Barbu, M.C., Wijnendaele, K., (2017) Adhesive systems used in the European particleboard, MDF and OSB industries. JurnalBDI:Wood Material Science & Engineering, Pag. 1-13, ISSN: 1748-0280
Barbu, M.C., Goodell, B., (2017) Universitäre Ausbildung für Holzwissenschaft in Europa und weltweit; Teil 17: USA(1) JurnalBDI:HolzTechnologie, Vol.58 (1/6), Pag. 52-56.
Krenn, S., Huber, H., Barbu, M.C., Petutschnigg, A., Schnabel T., (2017) Dämmplatten aus ein- und mehrjährigen Pflanzen gebunden mit Tannin und anderen Klebstoffen. JurnalBDI:HolzTechnologie, Vol.58 (4/6), Pag. 33-39.
HEINZMANN, B., Barbu, M.C., Effect of mid-diameter and log-parameters on the conversion factor of cubic measure to solid measure concerning industrial timber. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (1), Pag. 39-44.
Barbu, M.C., Young, T.M., Hiziroglu, S.S. (2017) Trends of the wood products higher education in North America. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 42-54.
Krenn, S., Huber, H., Barbu, M.C., Petutschnigg, A., Schnabel T., (2017) Insulation boards made of annual and perennial plants bonded with tannins and other adhesives. Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 227-235.
Young, T., Petutschnigg, A., Barbu, M.C., Industry 4.0 – Pragmatic algorithms, information quality and relational databases. Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 565-569.
Georgescu, S., Bedelean, B., (2017) Effect of Heat Treatment on Compresive And Tensile Strength of End To Edge Butt Joint. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 500-507.
Timar, M.C., Beldean, E., Varodi, A., Muscu, I., (2017) Old Wood Recovered from Constructions – from Scientific Challenge to Design Opportunities JurnalBDI:ProLigno ISSN 2069-7430, Vol.13 (4), Pag. 437-446.
Beldean, E., Majos, L., (2017) Restoration of gilded frames- Challenge and satisfaction. A case-study JurnalBDI:ProLigno ISSN 2069-7430, Vol.13 (4), Pag. 414-420.
Zeleniuc, O., Brenci, L.M., Spîrchez, C., (2017) Evaluation of oriented strand board behavior on fire. JurnalBDI:PRO LIGNO ISSN 2069-7430, Vol.13 (4), Pag. 212-218.
Lengyel, K., N., Câmpean, M., (2017) In-Line Preparation System for The Paraffin Emulsion Used Within a Particleboards Manufacturing Line. JurnalBDI: Bulletin of the Transilvania University of Brasov, Series II Vol. 10 (59) No.1.
Câmpean, M., Ishii, S., Georgescu, S.,Drying Time And Quality Of Eds-Treated Compared To Untreated Beech Wood (Fagus japonica). JurnalBDI:PRO LIGNO ISSN 2069-7430, Vol.13 (3), Pag. 23-30.
Muscu, I., Cionca, M., Bartha, B., (2017)A Vision of the Human Body as a Seating Concept JurnalBDI:PRO LIGNO ISSN 2069-7430, Vol.13 (4), Pag. 489-499.
Lunguleasa, A., Spirchez,C., Fotin, A., (2017) Research On Briquettes Obtained From Shredded Tobacco Cigarettes, As A Ligno-Cellulose Fuel. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag 579-585.
Fotin, A., Cismaru, I., (2017)Mechanization Of Wooden Framed Lamellar Panels Designed For Packaging Crates, Way Of Increasing Productivity And Quality. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag 168-173.
Țurcaș, O.M.,Fotin, A., Cismaru, I., (2017) Determining The Behavior Of The Basketball, On Vertical Direction, On Surfaces Of Floorings Conceived For Gymnasiums. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag 527-532.
Țurcaș, O.M.,Fotin, A., (2017)The Evolution And The Characteristics Of Wooden Flooring For Gym And Sport Courts. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 37-44.
Grecu, V., (2017)Research Upon Creating A System For Conversion The Water Kinetic Energy Of Hill And Mountain Rivers In Green Energy, Using Recycling Materials. JurnalBDI:PRO LIGNO ISSN 2069-7430, Vol.13 (4), Pag. 520-526
Ispas, M., Răcășan, S., (2017) Study Regarding The Influence Of The Tool Geometry And Feed Rate On The Drilling Quality Of Mdf Panels. JurnalBDI:ProLigno ISSN 2069-7430, Vol.13 (4), Pag. 174-180.
Spîrchez, C., Lunguleasa, A., Croitoru, C., (2017) Importance of combustible characteristics of biomass. Journal of EcoAgriTourism, vol.13,Nr.1(34), pag.42-46, ISSN 1844-8577.
Lunguleasa, A., Ionescu, C. Ș., (2017)Problems And Solutions Of Classical And Innovative Interventions On Cultural Objects With Wood Supports. JurnalBDI:ProLigno ISSN 2069-7430, Vol.13 (4), Pag. 447-454.
Lunguleasa, A., Petru, A., (2017) Colour Infuence Of The Laser Raster Speed On Wood Pyrography. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 508-515.
Spîrchez, C., Lunguleasa, A., (2017) Research into the properties of an innovative wood-plastic composite. Journal PRO LIGNO, vol.13, Nr.4, pag,283-289, ISSN 2069-7430.
Spîrchez, C., Lunguleasa, A., Croitoru, C., (2017) The importance of the wood biomass in environment protection. International Conference on Environment, Chemical Engineering and Materials, 27-29 iunie 2017, Brasov, ISBN 978-0-7354-1610-9.
Bartha, B., Olărescu, A., (2017 )Guide For Value-Adding Contemporary Architecture And Furniture Design In Vernacular Spirit. JurnalBDI:ProLigno ISSN 2069-7430, Vol.13 (4), Pag. 471-481.
Paltan R.D., Rădulescu,L.A.M., Biriș, C.M., (2017)Economical Engineering Aspects Applied In The Managerial Decision For The Implementation Of An Optimization Method To Streamline The Processes In The Wood Industry. JurnalBDI:PRO-LIGNO ISSN 2069-7430, Vol.13 (4), Pag. 637-644.
Demir, A., Aydin, I., Salcă, E.A., (2017) Some technological properties of plywood after fire retardant treatment in different concentrations. JurnalBDI:ProLigno ISSN 2069-7430, Vol.13 (4), Pag. 40-45.
Salcă, E.A., (2017) Optimization of the cutting schedule during sanding. JurnalBDI:Lesnoy vestnik/Forestry Bulletin ISSN 2542-1468 Vol. 21. No 4. Pag. 70–72.
Spîrchez, C., Lunguleasa, A., (2017) Evaluarea puterii calorice a brichetelor lignocelulozice. Buletinul AGIR, nr.2/2017, ISSN 1224-7928.
Lunguleasa, A., Spîrchez, C., (2017) The Compaction - Compression Coefficient of Chipboard Plates. RECENT -Rezultatele Cercetarilor Noastre Tehnice, UNIV. BRASOV;1582-0246,2065-4529(e)
Olaru, I.V., Timar, M.C., Varodi, A.M., Văcariu, D.A., Chirtea, I., (2017) Restoration of an Italian "Cassone" from 17th Century. JurnalBDI:Pro Ligno ISSN 2069-7430, Vol.13 (4), Pag. 429-436.
Varodi, A.M., Timar, M.C., Liu, X.Y., Cojocariu, C., (2017)Effect of natural ageing in indoors conditions on the colour of wood surfaces finished with natural traditional materials. JurnalBDI:Proligno ISSN 2069-7430, Vol.13 (4), Pag. 331-340.

2018

Bedelean, B., (2018). Application of artificial neural networks and Monte Carlo method for predicting the reliability of RF phytosanitary treatment of wood. European Journal of Wood and Wood Products, Vol. 76(4), pag.1113-1120. ISSN: 1436-736X. DOI: 10.1007/s00107-018-1312-1.
Beldean, E, Muszka, E. (2018). Learning Motivation Among Students in Wood Engineering. PRO Ligno, Vol 14 (4), 118-123, ISSN (Online) 2069-7430.
Bădin, N., Câmpean, M., Lengyel, K., Ispas, M., Bedelean, B. (2018). Property Improvement of Thin High-Density Fiberboard Panels Used as Door-Skins. BioResources Vol. 13(1), pag. 1042-1054. ISSN 1930-2126. DOI: 10.15376/biores.13.1.1042-1054.
Lengyel, K., Barbu, M.C., Câmpean, M., Bădin, N., Bedelean, B. (2018). Improving Properties of Particleboards with Reduced Density. BioResources Vol.13(1), pag.1289-1302. ISSN: 1930-2126. DOI: 10.15376/biores.13.1.1289-1302.
Bădin, N., Ispas, M., Bedelean, B., Câmpean, M. (2018). Influence of the Press Closing Time Upon the Properties of HDF Panels. Pro Ligno Vol.14(4), pag. 92-100. ISSN (ONLINE): 2069-7430.
Croitoru, C., Spîrchez, C., Cristea, D., Lunguleasa, A., Pop, M.A., Bedo, T., Roată I.C., Luca, M.A., (2018). Calcium carbonate and wood reinforced hybrid PVC composites. Journal Applied Polymer Science, Vol.135 (22), ISSN:0021-8995.
Croitoru, C., Spîrchez, C., Lunguleasa, A., Cristea, D., Roată, I.C., Pop, M.A., Bedo, T., Stanciu, E.M., Pascu, A., (2018). Surface properties of thermally treated composite wood panels. Journal Applied Surface Science, Vol.438. pag. 114-126, ISSN: 0169-4332.
Spîrchez, C., Lunguleasa, A., Croitoru, C., Gaceu, L., (2018). Research of calorific power for wood species in Romania. Journal of EcoAgriTourism, Vol.1, ISSN: 1844-8577.
Spîrchez, C., Lunguleasa, A., Croitoru, C., Gaceu, L., (2018). Cercetări privind evaluarea puterii calorice a biomasei lemnoase. Buletinul AGIR (Asociația Generală a Inginerilor din România), nr.2, pag.16-19, ISSN 1224-7928.
Wallenhorst, L., Gurau, L., Gellerich, A., Militz, H., Ohms, G., Viöl, W., (2018). UV-blocking properties of Zn/ZnO coatings on wood deposited by cold plasma spraying at atmospheric pressure. Applied Surface Science, Vol. 434, pag.1183–1192. ISSN: 0169-4332. DOI:10.1016/j.apsusc.2017.10.214
Gurau, L., Petru, A., (2018). The influence of CO2 laser beam power output and scanning speed on surface quality of Norway maple (Acer platanoides). BioResources, Vol. 13(4), pag: 8168-8183. ISSN 1930-2126. DOI:10.15376/biores.13.4.8168-8183.
Amiandamhen, S.O., Montecuccoli, Z., Meincken, M., Barbu, M.C., Tyhoda, L., (2018). Phosphate bonded wood composite products from invasive Acacia trees occurring on the Cape Coastal plains of South Africa. European Journal of Wood and Wood Products, Vol. 76(2), Pag. 437-444. ISSN: 1938-1943. DOI 10.1007/s00107-017-1191-x.
Kain, G., Lienbacher, B., Barbu, M.C., Richter, K., Petutschnigg, A., (2018). Larch bark insulation board: interactions of particle orientation, physical–mechanical and thermal properties. European Journal of Wood and Wood Products, Vol. 76(2), pag. 489-498. ISSN: 1938-1943. DOI 10.1007/s00107-017-1271-y.
Tudor, E.M., Barbu, M.C., Petutschnigg, A., Reh, R., (2018). Added-value for wood bark as a coating layer for flooring tiles. Journal of Cleaner Production, Vol. 170, pag.1354-1360. ISSN: 0959-6526. DOI: 10.1016/j.jclepro.2017.09.156.
Kain, G., Lienbacher, B., Barbu, M.C., Senck, S., Petutschnigg, A., (2018). Water vapour diffusion resistance of larch bark insulation panels and application considerations based on numeric modelling. Construction and Building Materials, Vol. 164, pag. 308-316. ISSN: 0950-0618. DOI: 10.1016/j.conbuildmat.2017.12.212.
Pröller, M., Nocetti, M., Brunetti, M., Barbu, M.C., Blumentritt, M., Wessels, B., (2018). Influence of processing parameters and wood properties on the edge gluing of green Eucalyptus grandis with a one-component PUR adhesive. European Journal of Wood and Wood Products, Vol. 76, pag. 1195–1204. ISSN: 1938-1943. DOI: 10.1007/s00107-018-1313-0.
Dumitraşcu, R., Lunguleasa, A., Spirchez, C., (2018). Renewable pellets obtained from aspen and birch bark, BioResources, Vol. 13(3), pag. 6985-7001. ISSN 1930-2126.
Lunguleasa, A., Ayrilmis, N., Spirchez, C., Özdemir, F., (2018). Investigation of the Effects of Heat Treatment Applied to Beech Plywood. Drvna Industrija, Vol. 69 (4), pag. 349-355. DOI: 10.5552/drind.2018.1768.
Bekhta, P., Salca, E.A. (2018). Influence of veneer densification on the shear strength and temperature behavior inside the plywood during hot press. Construction and Building Materials Vol.162, pag.20-26. ISSN 0950-0618. DOI:10.1016/j.conbuildmat.2017.11.161.
Dumitrascu, A.E., Salca, E.A., Mihail, L.A., Ciobanu, V.D., and Musat, E.C. (2018). Inferential statistics of Quercus species in veneer cutting, BioResources, Vol.13(3), pag.6766-6777. ISSN 1930-2126. DOI: 10.15376/biores.13.3.6766-6777.
Bekhta, P., Salca, E.A., Kozak, R. (2018). Properties of wood-straw composites bonded with modified UF adhesive and pre-treated straw particles. PRO LIGNO, Vol. 14 (1). Pag. 37-41. ONLINE ISSN 2069-7430.
Şova, D., Porojan, M., Bedelean B., Huminic G. (2018). Effective thermal conductivity models applied to wood briquettes. International Journal of Thermal Sciences, Vol.124, pag. 1-12, ISSN: 1290-0729. DOI: 10.1016/j.ijthermalsci.2017.09.020.
Brenci, L.M., Coșereanu, C., Zeleniuc, O., A., Georgescu, S.V., Fotin, A., (2018). Thermal conductitity of wood with ABS waste core sandwich composites subject to various core modification. Bioresoures, Vol. 13(1), pag. 555-568, ISSN: 1930-2126.
Pop, D.M., Timar M.C., Varodi A.M., (2018). Comparative assessment of antifungal potential of clove (Eugenia Caryophylatta) and cinnamon (Cinnamonum verum) essential oils, Pro Ligno, Vol 14(4), pag. 82-91, ISSN (Online): 2068-7430.
Croitoru, C., Varodi A.M., Timar, M.C., Stanciu E.M., Pascu A., (2018). Wood-plastic composites based on HDPE and ionic liquid additives. J. Mater Sci., Vol. 53(6), pag. 4132–4143. ISSN: 1573-4803 (Online). DOI: 10.1007/s10853-017-1826-7
Bartha, B., (2018). Vernacular Housing and Furnishing Patterns of Fundata Village, Brașov County, Romania. PRO LIGNO, Vol. 14 (4), pag.101-110. ISSN (Online): 2069-7430.
Olărescu, A. M., Gronegger, T.H., Bartha, B., Cionca, M., Muscu I., 2018. Non formal education in design field. Innovation in woodworking industry and engineering design, No. 2 (14), pp. 27 – 35. ISSN 1314 – 6149.
Țurcaș, O.M., Fotin, A., Coșereanu, C., Rădulescu, L.A.M., (2018). Determining the Behaviour of the Basketball, on Vertical Direction, on Surfaces of Floorings Conceived For Gymnasiums. Part II. PRO LIGNO, Vol. 14 (4), pag. 111-117. ISSN (Online) 2069-7430.

2019

Georgescu, S., Varodi, A.M., Răcășan, S., Bedelean, B., (2019). Effect of the dowel length, dowel diameter, and adhesive consumption on bending moment capacity of heat-treated wood dowel joints. Bioresources, Vol.14 (3), pag.6619-6632. ISSN: 1930-2126. DOI: 10.15376/biores.14.3.6619-6632.
Bedelean, B., Șova D., (2019). A novel method for assembling a wood drying schedule based on design of experiments. Pro Ligno, Vol.15(4), pag.89-95. ISSN (ONLINE) 2069-7430.
Beldean, E., Timar, M.C., (2019). The effect of a PEG treatment on different wood species. PRO Ligno, Vol. 15 (4), pag.268-273, ISSN (Online) 2069-7430.
Gliga, V., Stanciu, M.D., Nastac, S., Dinulică, F., Câmpean, M. (2019). Study Concerning the Natural Frequency and Damping Factor of the Top and Back Plate for Different Types Of Violins. Pro Ligno Vol.15(4):, pag.67-74. ISSN (ONLINE) 2069-7430.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2019). Researches on grape husk waste obtained from the winery and its use as pellets for combustion. Wood Research, Vol. 64(3), pag.549-556. ISSN: 1336-4561.
Spîrchez, C., Lunguleasa, A., (2019). Comparative study of spruce and beech pellets in terms of physical, mechanical and energy properties. Pro Ligno, Vol.15 (4), pag. 321-328. ISSN: 2069-7430.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2019). Characteristics of the wood biomass. Journal of EcoAgriTourism, Vol.1. ISSN: 1844-8577.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2019). Research regarding importance of the wood biomass. Journal of EcoAgriTourism, Vol.2. ISSN: 1844-8577.
Spîrchez, C., Ayrilmis, N., Lunguleasa, A., Croitoru, C., Prună, M., (2019). Some properties of pellets made of spruce and beech torrefied sawdust. Environmental Research and Technology, Vol.2(1), pag.26-33. ISSN: 2636-8498.
Spîrchez, C., Lunguleasa, A., Croitoru, C., Gaceu, L., (2019). Importanța potențialului energetic al biomasei lemnoase. Buletinul AGIR (Asociația Generală a Inginerilor din România), nr.2, pag.12-16.ISSN: 1224-7928.
Zeleniuc, O., Brenci, L., Cosereanu, C., Fotin, A., (2019). Influence of Adhesive Type and Content on the Properties of Particleboard Made from Sunflower Husks. BioResources, Vol.14(3), 7316-7331. ISSN: 1930-2126. DOI:10.15376/biores.14.3.7316-7331.
Zeleniuc, O. Mateiu C., (2019). Furniture design in concept Lego (2019). Pro Ligno, Vol 15(4), pag.380-387. ISSN (ONLINE): 2069-7430
Gurau, L., Ayrilms, N., (2019). Effect of raw material composition of wood plastic composites on surface roughness parameters evaluated with a robust filtering method. Journal of Thermoplastic Composite Materials, Vol. 32(4), pag. 427-441. ISSN: 0892-7057. DOI: 10.1177/0892705718759391.
Gurau, L., Irle, M., Buchner, J., (2019). The surface roughness of heat treated and untreated beech (Fagus sylvatica l.) wood after sanding. BioResources, Vol.14(2), pag: 4512-4531. ISSN 1930-2126. DOI:10.15376/biores.14.2.4512-4531.
Gurau, L., Benthien, J.T., Ohlmeyer, M., Ayrilmis, N., (2019). Effect of particleboard density and core layer particle thickness on surface roughness. Drewno, Vol. 62(204), pag. 71-83. ISSN 1644-3985. DOI: 10.12841/wood.1644-3985.292.13
Metzner, C., Platzer, M., Young, T.M., Bichescu, B., BARBU, M.C., Rials, T., (2019). Accurately Estimating and Minimizing Costs for the Cellulosic Biomass Supply Chain with Statistical Process Control and the Taguchi Loss Function. BioResources, Vol.14(2), pag. 2961-2976. ISSN 1930-2126. DOI: 10.15376/biores.14.2.2961-2976.
Schnabel, T., BARBU, M.C., Windeisen, E., Petutschnigg, A., Tondi, G., (2019). Impact of Leather on the Fire Resistance of Leather-Wood Fibreboard: FT-IR Spectroscopy and Pyrolysis-GC-MS Investigation. Advances in Materials Science and Engineering, Vol. 2019, pag. 1-8. ISSN 1687-8442. DOI: 10.1155/2019/2473927.
Medved, S., Gajšek, U., Tudor, E.M., BARBU, M.C., Antonović, A., (2019). Efficiency of bark for reduction of formaldehyde emission from particleboards. Wood Research, Vol. 64 (2), pag. 307-316. ISSN: 1336-4561.
Pásztory, Z., Heinzmann, B., BARBU, M.C., (2019). Comparison of different stack measuring methods. Siberian Journal of Forest Science, Vol. 3, pag.5-13. ISSN 2311-1410. DOI 10.15372/SJFS20190301.
Medved, S., Tudor, E.M., BARBU, M.C., Jambreković, V., Spanic, N., (2019). Effect of pine bark dust on particleboard thickness swelling and internal bond. Drvna industrija, Vol. 70 (2), Pag. 141-147. ISSN: 0012-6772. DOI: 10.5552/drvind.2019.1902.
Schild, A., Cool, J., BARBU, M.C., Smith, G.D., (2019). Feasibility of substituting core layer strands in randomly OSB with contaminated waste wood particles. Wood Material Science & Engineering, Vol.16, Pag.170-177.ISSN: 1748-0272 . DOI: 10.1080/17480272.2019.1652682.
Lunguleasa, A., Ayrilmis, N., Spirchez, C., Croitoru, C., (2019). Increasing the Calorific Properties of Sawdust Waste from Pellets by Torrefaction, Bioresources, Vol.14(4), pag. 7821-7839. ISSN: 1930-2126.
Salca, E.A., (2019). Black Alder (Alnus glutinosa L.) – A resource for value-added products in furniture industry under European screening. Current Forestry Reports, Vol. 5(1), pag.41-54. 2198-6436 .DOI:10.1007/s40725-019-00086-3.
Salca, E.A., Hiziroglu, S., (2019). Hardness and roughness of overlaid wood composites exposed to a high-humidity environment. Coatings, Vol.9(11), 711. ISSN: 2079-6412. DOI:10.3390/coatings9110711.
Salca, E.A (2019)., Assessment of the Processing Roughness of Black Alder Surfaces. Sigma Journal of Engineering and Natural Sciences, Vol. 10 (1), pag. 47-53. ISSN 1304-7205.
Varodi, A.M., Beldean, E., Timar, M.C., (2019). Furan resin as potential substitute for phenol-formaldehyde resin in plywood manufacturing. Bioresources, Vol. 14(2), pag. 2727-2739. ISSN 1930-2126.
Georgescu, S.V., Coşereanu, C., Fotin A., Brenci L.M., Costiuc, L., (2019). Experimental thermal characterization of timber frame exterior wall using reed straws as heat insulation materials. Journal of Thermal Analysis and Calorimetry, Vol. 138, pag. 2505–2513. ISSN (ONLINE): 1588-2926. DOI: 10.1007/s10973-019-08325-2.
Zeleniuc, O., Brenci, L.M., Coşereanu, C., Fotin, A., (2019). Influence of Adhesive Type and Content on the Properties of Particleboard Made from Sunflower Husks. BioResources, Vol. 14(3), pag. 7316-7331. ISSN 1930-2126. DOI: 10.15376/biores.14.3.7316-7331
Reiprecht, L., Pop, D.M., Vidholdova Z., Timar, M.C., (2019). Anti-decay potential of five essential oils against wood decaying fungi Serpula lacrymans and Trametes versicolor, Acta Facultatis Xylologiae Zvolen, Vol. 61(2), pag. 63−72. ISSN:1336-3824. DOI 10.17423/afx.2019.61.2.06.
Liu, X.Y, Timar, M.C, Varodi, A.M. (2019). A comparative study on the artificial UV and natural ageing of beeswax and Chinese wax and influence of wax finishing on the ageing of Chinese Ash (Fraxinus mandshurica) wood surfaces. Journal of Photochemistry & Photobiology B: Biology, Vol. 201, 111607, pag. 1873-2682. DOI: 10.1016/j.jphotobiol.2019.111607.
Timar, M.C., Beldean, E.C., Olaru, I.V., Varodi, A.M., Pop, D.M., (2019). Challenges in the conservation of an early 19th century holy door: the first steps. Pro Ligno, Vol 215 (4), pag. 128-137. ISSN: 2069-7430.
Pop, D.M., Timar, M.C., Varodi, A.M., (2019). Comparative assessment of the biocidal potential of 3 essential oils. Bulletin of the Transilvania University of Braşov Series II: Forestry, Wood Industry, Agricultural Food Engineering, Vol. 12 (61), pag. 83-96. ISSN (Online) 2971-9372. DOI: 10.31926/but.fwiafe.2019.12.61.1.7.
Pop, D.M, Varodi, A.M., Timar, M.C. (2019). Essential oils as potential ecological wood preservatives – a preliminary test on thyme essential oil. Innovation in Woodworking Industry and Engineering Design, Vol 15(1), pag. 28-36. ISSN 2367-6663.
Bartha, B., (2019). Vernacular Housing and Furnishing Patterns of Cernatu Village, Covasna County, Romania. PRO LIGNO, Vol. 15 (3), pag.45-54. ISSN (Online) 1841-4737.
Olărescu, A. M., (2019). Nicolae P. Leonăchescu – o viață dedicată creației. În: Studii şi comunicări/DIS. Vol. 12, Nr. XII, Academia Română, Comitetul Român de Istoria şi Filosofia Ştiinței şi Tehnicii, Editura Mega, Cluj – Napoca, pag. 409 – 420, ISSN 1844 – 9229, ISSN – L 1844 – 9220, http://studii.crifst.ro/.
Olărescu, A. M., Bartha, B., Gronegger, T.H., (2019). Education in design field: non formal and exeperimental approaches. Pro Ligno, Vol. 15(4), pag. 400 – 409. ISSN Online 2069 – 7430.
Turcas Diaconu, O-M., Fotin, A, Coşereanu, C., (2019). Beech wood (Fagus sylvatica L.) flooring structures designed to increase the basketball bounce height. European Journal of Wood and Wood Products. Vol 77(5), pag. 853-860. ISSN: 1436-736X. DOI: 10.1007/s00107-019-01447-2.
Ispas, M., Coșereanu, C., Zeleniuc, O. and Porojan, M., (2019). Flexural Properties of Blockboard Reinforced with Glass Fiber and Various Types of Fabrics. BioResources, Vol. 14(4), pag. 9882-9892. ISSN 1930-2126.
Cosereanu, C., Cerbu, C., (2019). Morphology, Physical, and Mechanical Properties of Particleboard Made from Rape Straw and Wood Particles Glued with Urea-Formaldehyde Resin. Bioresources, Vol.14 (2), pag. 2903-2918. ISSN: 1930-2126. DOI: 10.15376/biores.14.2.2903-2918.
Georgescu, S.V., Cosereanu, C., (2019). Thermal insulating panels made of recycled materials. Pro Ligno, Vol.15(1), pag. 43-48. ISSN: 2069-7430. Balea, G., Cosereanu, C., (2019). Influence of Lignin-Based Adhesives Upon the Properties of Particleboards Made from Rape Straws. Pro Ligno, Vol. 15(1), pag. 49-54. ISSN: 2069-7430.
Turcas, O.M., Fotin, A., Cosereanu, C., (2019). Flooring structures designed for sports-halls and investigated for the ball rebound test. Pro Ligno 15(4), pag. 82-88. ISSN: 2069-7430.

2020

Răcășan, S., Bedelean B., Georgescu, S., Varodi, A.M., (2020). Comparison Between Artificial Neural Networks and Response Surface Methodology to Predict the Bending Moment Capacity of Heat-treated Wood Dowel Joints. Bioresources, Vol.15 (3), pag. 5764-5775. ISSN: 1930-2126. DOI: 10.15376/biores.15.3.5764-5775.
Gliga, V., Stanciu, M.D., Nastac, S., Câmpean, M. (2020). Modal Analysis of Violin Bodies with Back Plates Made of Different Wood Species. BioResources Vol.15(4), pag. 7687-7713. ISSN: 1930-2126. DOI: 10.15376/biores.15.4.7687-7713.
Brandstetter, M., Zeleniuc, O., Pei, Gh., Câmpean, M. (2020). Conversion Efficiency of Fir Roundwood into Sawlogs. BioResources Vol. 15(3), pag. 5653-5665. ISSN: 1930-2126. DOI: 10.15376/biores.15.3.5653-5665.
Brandstetter, M., Ispas, M., Câmpean, M. (2020). Conversion Efficiency of Fir Roundwood into Lumber. Pro Ligno Vol. 16(4), pag. 68-74. ISSN (ONLINE): 2069-7430.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2020). Caloric analysis of the wood biomass from softwood species. Journal of EcoAgriTourism, Vol.16, Nr.1(40), pag.31-35. ISSN 1844-8577.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2020). Importance of wood biomass in Romania. Journal of EcoAgriTourism, Vol.16, Nr.2(41), pag. 34-38. ISSN 1844-8577.
Spîrchez, C., Lunguleasa, A., (2020). Importanța proprietăților biomasei lemnoase în România. Buletinul AGIR (Asociația Generală a Inginerilor din România), nr.1, pag.7-11. ISSN 1224-7928.
Zeleniuc, O., Dumitraşcu, A.-E., and Ciobanu, V. D., (2020). Properties evaluation by thickness and type of oriented strand boards manufactured in continuous press line, BioResources. 15(3), pag. 5829-5842. ISSN: 1930-2126. DOI:10.15376/biores.9.4.6805-6816
Tudor, E.M., Barbu, M.C., Petutschnigg, A., Reh, R., Kristak, L. (2020): Analysis of Larch-Bark Capacity for Formaldehyde Removal in Wood Adhesives. International Journal of Environmental Research and Public Health 17, 764 (9 p.). ISSN: 1660-4601. DOI: 10.3390/ijerph17030764.
Kain, G., Stratev, D., Tudor, E.M., Lienbacher, B., Weigl, M., Barbu, M.C., Petutschnigg, A., (2020). Qualitative investigation on VOC-emissions from spruce and larch loose bark and bark panels. European Journal of Wood and Wood Products, Vol. 78, pag.403–412. ISSN:1938-1943. DOI: 10.1007/s00107-020-01511-2.
Tudor, E.M., Dettendorfer, A., Kain, G., Barbu, M.C., Reh, R., Kristak, L., (2020). Sound-Absorption Coefficient of Bark-Based Insulation Panels. Polymers, Vol.12(5), 1012, pag. 1-11. ISSN: 2073-4360. DOI: 10.3390/polym12051012.
Kain, G., Tudor, E.M., Dettendorfer, A., Barbu, M.C., (2020). Potenzial von Baumrinde für den Einsatz als Schallabsorptionsmaterial. Bauphysik, Vol.42 (3), pag. 124-130. ISSN: 1437-0980. DOI: 10.1002/bapi.202000007.
Tudor, E.M., Zwickl, C., Eichinger, C., Petutschnigg, A., Barbu, M.C., (2020). Performance of softwood bark comminution technologies for determination of targeted particle size in further upcycling applications. Journal of Cleaner Production, Vol. 269, 122412, pag.1-7. ISSN 0959-6526. DOI: 10.1016/j.jclepro.2020.122412.
Kain, G., Morandini, M., Barbu, M.C., Petutschnigg, A., Tippner, J., (2020). Specific Gravity of Inner and Outer Larch Bark. Forests, Vol.11, 1132. ISSN 1999-4907. DOI: 10.3390/f11111132.
Barbu, M.C., Lohninger, Y., Hofmann, S., Kain, G., Petutschnigg, A., Tudor, E.M., (2020). Larch Bark as a Formaldehyde Scavenger in Thermal Insulation Panels. Polymers, Vol.12(5), 2632. ISSN: 2073-4360. DOI: 10.3390/polym12112632.
Jorda, J., Kain, G., Barbu, M.C., Haupt, M., Kristak, L., (2020). Investigation of 3D-moldability of flax fiber reinforced beech plywood. Polymers Vol.12(12), 2852. ISSN: 2073-4360. DOI: 10.3390/polym12122852.
Bekhta, P., Salca, E.A, Lunguleasa, A., (2020). Some properties of plywood panels manufactured from combination of thermally densified and non-densified veneers of different thicknesses in one structure. Journal of Building Engineering, Vol.29, 101116, pag.1-12. ISSN(ONLINE): 2352-7102.
Barbu, M.C., Sepperer, T., Tudor, E.M. Petutschnigg, A., (2020). Walnut and hazelnut shells: Untapped industrial resources and their suitability in lignocellulosic composites. Applied Sciences, Vol. 10, 6340. ISSN: 2076-3417. DOI: 10.3390/app10186340.
Tudor, E.M., Scheriau, C., Barbu, M.C., Reh, R., Kristak, L., Schnabel, T., (2020). Enhanced resistance to fire of the bark-based panels bonded with clay. Applied Sciences Vol. 10, 5594. ISSN: 2076-3417. DOI: 10.3390/app10165594.
Schwarzenbrunner, R., Barbu, M.C., Petutschnigg, A., Tudor, E.M., (2020). Water-resistant casein-based adhesives for veneer bonding in biodegradable ski cores. Polymers, Vol. 12(8), 1745. ISSN: 2073-4360. DOI: 10.3390/polym12081745.
Lunguleasa, A., Spirchez, C., Zeleniuc, O., (2020). Evaluation of the calorific values of wastes from some tropical wood species. Maderas-Cienc Tecnol, Vol. 22(3), pag. 269-280. ISSN 0718-221X.
Dumitrascu, A.E., Lunguleasa, A., Salca, E.A., Ciobanu, V. D., (2020). Evaluation of selected properties of oriented strand boards made from fast growing wood species. BioResources, Vol.15(1), pag.199-210. ISSN 1930-2126.
Salca, E.A., Bekhta, P., Seblii, Y. (2020). The effect of veneer densification temperature and wood species on the plywood properties made from alternate layers of densified and non-densified veneers. Forests, 11 (6), 700. ISSN1999-4907. DOI:10.3390/f11060700.
Bratu, C.A., Ciobanu V.D., Derczeni, R.A. and Salca, E.A. (2020). Study on the forest road pavements reinforced with geogrids by using the 2D FEM method. Road Materials and Pavement Design, Vol. 21 (6), ISSN 1738-1752. DOI: 10.1080/14680629.2019.1566085.
Chotikhun, A., Kittijaruwattana, J., Salca, E.A., HIZIROGLU, S. (2020). Selected Physical and Mechanical Properties of Microwave Heat Treated Rubberwood (Hevea brasiliensis). Applied Sciences-Basel 10 (18), 6273. ISSN: 2076-3417. DOI: 10.3390/app10186273.
Pop, D.M, Timar, M.C., Beldean, E.C., Varodi, A.M., (2020). Combined testing approach to evaluate the antifungal efficiency of clove (Eugenia caryophyllata) essential oil for potential application in wood conservation. BioResources, Vol.15(4), pag.9474-9489. ISSN 1930-2126.
Pop, D.M, Timar, M.C., Beldean, E.C, Varodi, A.M. (2020). Combined testing approach to evaluate the antifungal efficiency of clove (Eugenia caryophyllata) essential oil for potential application in wood conservation. BioResources, Vol.15(4), pag. 9474-9489, ISSN: 1930-2126.
Timar, M.C, Varodi, A.M, Liu, X.Y. (2020). The influence of artificial ageing on selected properties of wood surfaces finished with traditional materials – an assessment for conservation purposes. Bulletin of Transilvania University of Brasov, series II: Forestry - Wood industry – Agriculture food engineering. ISSN: 2065-2135, Vol. 13 (62), No.2, pag. 81-94. DOI:10.31926/but.fwiafe.2020.13.62.2.7
Bartha, B., (2020). Neo-Vernacular Architectural and Furnishing Patterns of Europe: Concepts for Value-Adding in Contemporary Design. PRO LIGNO, Vol. 16 (2), pag. 43-53. ISSN (Online): 1841-4737.
Bartha, B., Olărescu, A., (2020). Vernacular Architectural and Furnishing Patterns of Stroești Village, Argeș County, Romania. PRO LIGNO, Vol. 16 (4), pag. 37-45. ISSN (Online) – 1841-4737. Bartha, B., Olărescu, A. (2020). Neo-Vernacular Concepts for Value-Adding in Contemporary European Architecture and Design. Bulletin of the Transilvania University of Brasov, Vol. 13 (62), no. 2 –series II - Forestry. Wood Industry. Agricultural Food Engineering. ISSN 2065-2135.
Ispas, M., (2020). Improvements of Wood Milling Machines. PRO LIGNO, Vol. 16(4), pag. 61-67. ISSN (Online) 1841-4737.
Stanciu, M.D., Cosereanu, C., Dinulică, F., Bucur, V., (2020) Effect of wood species on vibration modes of violins plates. European Journal of Wood and Wood Products, Vol.78, pag. 785–799. ISSN: 0018-3768. DOI: 10.1007/s00107-020-01538-5.
Paiu, I., Androne, A., Cosereanu, C., (2020). CAD-CAM-CAE in wood industry. A case study for perforated ornaments processed on CNC router. Pro Ligno, Vol. 16(3), pag. 60-67. ISSN (Online) 1841-4737.

2021

Bedelean, B., Cociș, R., (2021). The influence of the freezing and thawing process on the bending moment capacity of L-shaped heat-treated wood dowel joints. Bulletin of the Transilvania University of Brasov, Series II: Forestry, Wood Industry, Agricultural Food Engineering, Vol.14-63, no.2, pag. 51–60. ISSN (Online): 2971-9372. DOI: 10.31926/but.fwiafe.2021.14.63.2.5.
Bedelean, B.I., Neculăeș, I., Spîrchez, C.G., Răcășan, S., (2021). The Influence of the Number and Position of Dowels on the Bending Moment Capacity of Heat-treated Wood Dowel Joints. Bulletin of the Transilvania University of Brasov, Series II: Forestry, Wood Industry, Agricultural Food Engineeringthis, Vol.14-63(1), pag. 67–76. ISSN (Online): 2971-9372. DOI: 10.31926/but.fwiafe.2021.14.63.1.6
Porojan, M., Brandstetter, M., Ispas, M., Bedelean, B., Campean, M., (2021). Research Concerning the Bending Properties of Reconstituted Spruce Lumber Boards, Obtained by Edge-Cutting at 45° and Gluing. Applied Science, Vol.11(21), pag.1-12. ISSN: 2076-3417. DOI:10.3390/app11219937.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2021). Comparative study referring to physical and calorific properties of pellets obtained from grape biomass. Revista Environmental Engineering and Management Journal, Vol.20 (3) pag. 361-369. ISSN: 1843-3707.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2021). Research regarding the ignition characteristics of the wood biomass from the hardwood trees. Journal of EcoAgriTourism, Vol.17, Nr.1(42), pag.31-35. ISSN: 1844-8577.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2021). Utilizing the energy potential of wood biomass. Journal of EcoAgriTourism, Vol.17, Nr.2(43). ISSN: 1844-8577.
Spîrchez, C., Lunguleasa, A., (2021). Proprietățile calorice ale biomasei lemnoase. Buletinul AGIR (Asociația Generală a Inginerilor din România), Nr.1, pag.7-11. ISSN: 1224-7928.
Spirchez, C., Japalela, V., Lunguleasa, A., Buduroi, D., (2021). Analysis of briquettes and pellets obtained from two types of Paulownia (Paulownia tomentosa and Paulownia elongata) sawdust. BioResources, Vol. 16(3), pag. 5083-5096. ISSN: 1930-2126.
Spirchez G.C, Lunguleasa, A., Ciobanu, V.D., (2021). Evaluation of Oak-Specific Consumption, Efficiency, and Losses from an Aesthetic Veneer Factory. Applied Sciences, Vol.11(9), 4300. ISSN 2076-3417. DOI: 10.3390/app11094300.
Balea Paul G., Timar, M.C., Zeleniuc, O., Lunguleasa, A., Coșereanu, C., (2021). Mechanical Properties and Formaldehyde Release of Particleboard Made with Lignin-Based Adhesives. Applied Sciences, Vol.11(18), 8720. ISSN 2076-3417. DOI:10.3390/app11188720.
Scriba, C., Lunguleasa, A., Spirchez, C., Ciobanu, V., (2021). Influence of INGER and TORDIS Energetic Willow Clones Planted on Contaminated Soil on the Survival Rates, Yields and Calorific Value. Forests, Vol.12(7), 826. ISSN: 1999-4907.DOI:doi.org/10.3390/f12070826
Dragusanu, V., Lunguleasa, A., Spirchez, C., (2021). The briquettes properties from seed sunflower husk and wood larch shavings. Wood research, Vol.66(4), pag. 689-699. ISSN(ONLINE): 2729-8906.
Lunguleasa, A. , Ayrilmiş, N., Sova, D., Spirchez, C., (2021). Selected properties of briquettes made from blends of bamboo and beech biomass. Turkish Journal of Agriculture and Forestry, Vol.45 (4), pag.389-401. ISSN (ONLINE): 1303-6173. DOI: 10.3906/tar-2101-7.
Scriba, C., Lunguleasa, A., Salca, E.A., Ciobanu, V. D., (2021). Properties of biomass obtained from short-rotation inger willow clone grown on a contaminated and non-contaminated land. Maderas. Ciencia y tecnología, Vol. 23, 14, pag.1-12. ISSN: 0718-221X. DOI:10.4067/s0718-221x2021000100414.
Lungu, A., Ispas, M., Brenci, L.M., Răcăsan, S., Coşereanu. C., (2021). Comparative Study on Wood CNC Routing Methods for Transposing a Traditional Motif from Romanian Textile Heritage into Furniture Decoration. Applied Sciences-Basel, Vol.11(15), 6713. ISSN: 2076-3417. DOI:10.3390/app11156713.
Lunguleasa, A., Dumitrascu, A.E., Spirchez, C., Ciobanu, V.D., (2021). Influence of the Strand Characteristics on the Properties of Oriented Strand Boards Obtained from Resinous and Broad-Leaved Fast-Growing Species. Applied Sciences, Vol.11(4), 1784. ISSN: 2076-3417. DOI:10.3390/app11041784.
Gurău, L., Coşereanu, C., Paiu, I., (2021). Comparative Surface Quality of Larch (Larix decidua Mill.) Fretwork Patterns Cut through by CNC Routing and by Laser. Appl. Sci. 2021, Vol.11(15), 6875 pag.1-16. ISSN: 2076-3417. DOI:10.3390/app11156875
Barbu, M.C., Montecuccoli, Z., Förg, J, Barbeck, U., Klimek, P., Petutschnigg, A., Tudor, E.M., (2021). Potential of Brewer’s Spent Grain as a Potential Replacement of Wood in pMDI, UF or MUF Bonded Particleboard. Polymers, Vol.13(3), 319. ISSN: 2073-4360. DOI: 10.3390/ polym13030319.
Barbu, M.C., Tudor, E.M., (2021). State of the art of the Chinese forestry, wood industry and its markets. Wood Material Science & Engineering, Vol.17, pag. 1030-1039. ISSN 1748-0272. DOI: 10.1080/17480272.2021.1891457.
Schnabel, T., Barbu, M.C., Tudor, E.M., Petutschnigg, A., (2021). Changing in Larch sapwood extractives due to distinct ionizing radiation sources. Materials, Vol.14, 1613. ISSN 1996-1944. DOI: 10.3390/ma14071613.
Gößwald, J., Barbu, M.C., Petutschnigg, A., Kristak, L., Tudor, E.M., (2021): Oversized planer shavings for the core layer of lightweight particleboard. Polymers, Vol.13, 1125. ISSN: 2073-4360. DOI: 10.3390/polym13071125
Ebner, D.H., Barbu, M.C., Klaushofer, J., Cermak, J., (2021). Surface modification of Spruce and Fir sawn-timber by charring in the traditional Japanese Method—Yakisugi. Polymers , Vol.13, 1662. ISSN: 2073-4360. DOI: 10.3390/polym13101662.
Gößwald, J., Barbu, M.C., Petutschnigg, A., Tudor, E.M., (2021). Binderless thermal insulation panels made of Spruce bark fibres. Polymers, Vol.13, 1799. ISSN: 2073-4360. DOI: 10.3390/polym13111799.
Tudor, E.M., Kristak, L., Barbu, M.C., Gergel, T., Nemec, M., Kain, G., Reh, R., (2021). Acoustic Properties of Larch Bark Panels. Forests, Vol. 12, 887. ISSN: 1999-4907. DOI: 10.3390/f12070887.
Medved, S., Tudor, E.M., Barbu, M.C., Young, T.M., (2021). Thermal conductivity of different bio-based insulation materials. Les/Wood, Vol.70(1), pag. 73-82. ISSN: 0024-1067. DOI: 10.26614/les-wood.2021.v70n01a05.
Kristak, L., Ruziak, I., Tudor, E.M., Barbu, M.C., Kain, G., Reh, R., (2021). Thermophysical properties of larch bark composite panels. Polymers, Vol. 13, 2287. ISSN: 2073-4360. DOI: 10.3390/polym13142287.
Jorda, J., Kain, G., Barbu, M.C., Petutschnigg, A., Kral, P., (2021). Influence of adhesive systems on the mechanical and physical properties of flax fiber reinforced beech plywood. Polymers, Vol.13, 3086. ISSN: 2073-4360. DOI: 10.3390/polym13183086.
Herzog, A., Kerschbaumer, T., Schwarzenbrunner, R., Barbu, M.C., Petutschnigg, A., Tudor, E.M., (2021). Efficiency of High-Frequency Pressing of Spruce Laminated Timber Bonded with Casein Adhesives. Polymers, Vol. 13, 4237. ISSN: 2073-4360. DOI: 10.3390/polym13234237.
Urstöger, J., Barbu, M.C., Pacher, T., Petutschnigg, A., Jorda, J., Tudor, E.M., (2021). Selected Properties of Cement Bound Spruce and Larch Bark Bio-Aggregates. Polymers, Vol. 13, 4438. ISSN: 2073-4360. DOI: 10.3390/polym13244438.
Salca, E.A, Krystofiak, T., LIS, B., Hiziroglu, S. (2021). Glossiness evaluation of coated wood surfaces as function of varnish type and exposure to different conditions. Coatings, Vol. 11(5), 558. ISSN: 2079-6412. DOI:10.3390/coatings11050558.
Beldean, E., Timar, M.C., (2021). A new opportunity for research in Romania – Subfossil wood. Bulletin of the Transilvania University of Braşov Series II: Forestry, Wood Industry, Agricultural Food Engineering. Vol. 14(63), No. 1, pag.77-88. ISSN (Online): 2971-9372.
Beldean, E. (2021). Variety of wood species from Romanian moveable cultural heritage. PRO LIGNO, Vol. 17 (4), pag.34-39. ISSN (Online): 2069-7430.
Timar, M.C., Buchner, J., Pop, D.M., Irle, M. (2021). The protection of beech wood (Fagus sylvatica) against the brown rot Postia placenta using clove (Eugenya caryophyllata) essential oil in linseed oil medium. Bulletin of the Transilvania University of Braşov, Series II: Forestry- Wood Industry - Agricultural Food Engineering, Vol. 14(63), pag.61-74. ISSN:2065-2135. DOI:10.31926/but.fwiafe.2021.14.63.2.6.
Bartha, B., (2021) Vernacular Architectural and Furnishing Patterns of Brașov, Sibiu, Covasna and Argeș Counties, Romania. PRO LIGNO, Vol. 17 (4), pag. 20-33. ISSN 2069-7430.
Paul, G.B., Timar, M.C., Zeleniuc, O., Lunguleasa, O., Coșereanu, C., (2021). Mechanical Properties and Formaldehyde Release of Particleboard Made with Lignin-Based Adhesives. Applied Sciences-Basel, Vol. 11(18), 8720. DOI: 10.3390/app11188720.
Lungu, A., Androne, A., Gurau, L., Racasan, S., Cosereanu, C., (2021). Textile heritage motifs to decorative furniture surfaces. Transpose process and analysis. Journal of Cultural Heritage, Vol. 52, pag. 192-201. ISSN: 1296-2074. DOI: 10.1016/j.culher.2021.10.006.
Paiu, I., Cosereanu, C., (2021). Fretted panels made of plywood and beech wood. Comparison and quality evaluation by stereo microscopy. PRO LIGNO, Vol. 17(2), pag. 45-54. ISSN: 1841-4737.
Balea, G., Cosereanu, C., (2021). Particleboard with low formaldehyde emission. Mechanical strength and resistance to water. PRO LIGNO, Vol. 17(4), pag. 9-19. ISSN: 1841-4737.

2022

Bedelean, B., Ispas, M., Răcășan S., Baba, M.N., (2022). Optimization of Wood Particleboard Drilling Operating Parameters by Means of the Artificial Neural Network Modeling Technique and Response Surface Methodology. Forests, Vol 13 (7), pag. 1-13. ISSN: 1999-4907. DOI: 10.3390/f13071045.
Deaconu, I., Câmpean, M., (2022). Evaluating a Drying Schedule for Oak Lumber Through Drying Rate Calculation and Quality Assessment. PRO LIGNO, Vol.18(2):, pag. 42-47. ISSN (ONLINE): 2069-7430.
Deaconu, I., Câmpean, M., (2022). Survey Concerning the Challenges of Industrial Drying of Quercus Lumber. PRO LIGNO, Vol. 18(4), pag. 36-44. ISSN ONLINE: 2069-7430
Spîrchez, C., Lunguleasa, A., (2022). Torrefaction of spruce, beech, and oak pellets in order to improve calorific value. Bioresources, Vol.17 (4), pag. 6804-6817. ISSN: 1930-2126.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2022). Properties of wood biomass from composite materials. Journal of EcoAgriTourism, Vol. 18, Nr.1(44), pag.5-9. ISSN: 1844-8577.
Spîrchez, C., Lunguleasa, A., Gaceu, L., (2022). Research on the importance of wood biomass in environmental protection. Journal of EcoAgriTourism, Vol.18, Nr.2(45), pag.31-36. ISSN: 1844-8577.
Spîrchez, C., Lunguleasa, A., (2022). Cercetări privind puterea calorică a biomasei lemnoase din materiale compozite. Buletinul AGIR (Asociația Generală a Inginerilor din România), nr.2, pag.8-10. ISSN 1224-7928.
Zeleniuc, O., Coșereanu, C., (2022). Effect of Variable Conditions of Exposure on the Physical and Mechanical Properties of Blockboards. Appl. Sci. Vol.12(2), 609, pag.2-14. ISSN 2076-3417. DOI.org/10.3390/app12020609.
Zeleniuc, O., (2022). Thermal insulation performance of wall structures made of recycled materials. PRO LIGNO, Vol 18 (4), pag. 26-35. ISSN (ONLINE): 2069-7430.
Zeleniuc, O. (2022). Recovered wood and branches for furniture design. PRO LIGNO, Vol 18 (1), pag: 28-35. ISSN (ONLINE): 2069-7430.
Gurau, L., (2022). Testing the Processing-Induced Roughness of Sanded Wood Surfaces Separated from Wood Anatomical Structure. Forests, Vol.13(2):331. ISSN: 1999-4907 DOI:10.3390/f13020331.
Condoroteanu, C.D., Gurau, L., Cosereanu, C., Georgescu, S.V., (2022). A proposed method to evaluate the effect of changing the kerfing parameters upon the static bending behavior of flexible plywood panels cut by laser. Appl. Sci., Vol. 12 (9), 4303, pag.1-17. ISSN 2076-3417. DOI:10.3390/app12094303.
Gurău, L., Coșereanu, C., Timar, M.C., Lungu, A., Condoroteanu, C.D., (2022). Comparative Surface Quality of Maple (Acer pseudoplatanus) cut through by CNC Routing and by CO2 Laser at Different Angles as Related to the Wood Grain. Coatings 2022, Vol.12(12), 1982, pag. 1- 22. ISSN: 2079-6412. DOI:10.3390/coatings12121982.
Ebner, D.H., Barbu, M.C., Gryc, V., Cermak, J., (2022). Surface Charring of Silver Fir Wood Cladding Using an Enhanced Traditional Japanese Yakisugi Method. BioRessources, Vol. 17(2), pag. 2031-2042. ISSN 1930-2126. DOI: 10.15376/biores17.2.2031-2042.
Jorda, J., Kain, G., Barbu, M.C., Köll, B., Petutschnigg, A., Kral, P., (2022). Mechanical Properties of Cellulose and Flax Fiber Unidirectional Reinforced Plywood. Polymers, Vol. 14, 843. ISSN 2073-4360. DOI: 10.3390/polym14040843.
Pacher, T., Barbu, M.C., Urstöger, J., Petutschnigg, A., Tudor, E.M., (2022). Fire Retardancy of Cementitious Panels with Larch and Spruce Bark as Bio-Admixtures. Polymers, Vol. 14, 1469. ISSN: 2073-4360. DOI: 10.3390/polym14071469.
Jorda, J., Cesprini, E, Barbu, M.C., Tondi, G., Zanetti, M., Kral, P., (2022). Quebracho Tannin Bio-Based Adhesives for Plywood. Polymers, Vol. 14, 2257. ISSN: 2073-4360. DOI: 10.3390/polym14112257.
Gurr, J., Barbu, M.C., Frühwald, A., Chaowanna, P., (2022). The bond strength development of coconut wood in relation to its density variations. The Journal of Adhesion, Vol. 98(10), pag.1520-1533. ISSN: 1545-5823. DOI: 10.1080/00218464.2022.2091437.
Barbu, M.C., Buresova, K., Tudor, E.M., Petutschnigg, A., (2022). Physical and mechanical properties of Paulownia tomentosa x elongata sawn wood from Spanish, Bulgarian and Serbian plantations. Forests, Vol. 13(10), 1543. ISSN: 1999-4907. DOI: 10.3390/f13101543.
Cesprini, E, Causin, V., De Iseppi, A., Zanetti, M., Marangon, M., Barbu, M.C., Tondi, G., (2022). Entirely renewable tannin-based adhesive for particleboard production. Forests, Vol. 13, 1781. ISSN 1999-4907. DOI: 10.3390/f13111781.
Olarescu, A., Lunguleasa, A., Radulescu, L., (2022). Using Resinous Wood Branches and Deciduous Spindles to Manufacture Panels with transverse structure. Bioressources, Vol. 17 (4), pag.6445-6463. ISSN: 1930-2126. DOI: 10.15376/biores.17.4.6445-6463
Chotikhun, A., Kittijaruwattana, J., Arsyad, W.O.M., Salca, E.-A., Hadi, Y.S., Hiziroglu, S. (2022). Some Properties of Wood Plastic Composites Made from Rubberwood, Recycled Plastic and Silica. Forests, Vol. 13, 427. ISSN: 1999-4907. DOI:10.3390/f13030427
Salca, E.A., Fekete-Kaszoni, L., (2022). Old stilt houses as an inspiration for modern dwellings. PRO LIGNO, Vol 18 (4), pag.45-56. ISSN (ONLINE): 2069-7430.
Şova, D., Gurău L., Porojan M., Florea O., Sandu V., Purcaru M., (2022). Indirect Evaluation of the Porosity of Waste Wood Briquettes by Assessing Their Surface Quality. Waste and Biomass Valorization, Vol. 13, pag.739-753. ISSN: 18772641. DOI: 10.1007/s12649-021-01513-y.
Gorgij, R., Pourtahmasi, K., Maali Amiri, R., Abdolkhani, A., Porojan M., (2022). Variations in tension wood characteristics of Populus alba under alternate bending, nitrogen fertilization, and gibberellin treatments. IAWA Journal, Vol.43 (3), pag. 337-352. ISSN: 0928-1541. DOI: 10.1163/22941932-bja10089.
Beldean, E., Ursachi, A., Pupezescu, A. (2022). Conservation-Restoration of Romanian Painted Wooden Hanger from Fagaras County. PRO LIGNO, Vol 18 (1), pag. 9-14, ISSN (Online): 2069-7430.
Brenci, L.M., Cosereanu, C., Olărescu, A., Ispas, M., (2022). Waste Management in Furniture and Wood Sector. PRO LIGNO, Vol 18(1), pag. 15-27. ISSN (ONLINE): 2069-7430.
Pop, D.M., Timar, M.C., Varodi, A.M., Beldean, E.C. (2022). An evaluation of clove (Eugenia caryophyllata) essential oil as a potential alternative antifungal wood protection system for cultural heritage conservation. Maderas Ciencia y tecnologia, Vol.24(11), pag.1-16. ISSN (ONLINE): 0718-221X. DOI: 10.4067/s0718-221x2022000100411.
Dupuis, V., Cerbu, C, Witkowski, L., Potarniche, A-V, Timar, M.C, Żychska, M., Sabliov, C.M., (2022). Nanodelivery of essential oils as efficient tools against antimicrobial resistance: A review of the type and physical-chemical properties of the delivery systems and applications. Drug Delivery, Vol.29 (1), pag. 1007-1024. ISSN (ONLINE): 1521-0464 DOI:10.1080/10717544.2022.2056663.
Liu, X.Y., Timar, M.C., Varodi, A.M., Nedelcu, R., Torcătoru, M.J., (2022). Colour and Surface Chemistry Changes of Wood Surfaces Coated with Two Types of Waxes after Seven Years Exposure to Natural Light in Indoor Conditions. Coatings, Vol.12(11),1689. ISSN: 2079-6412. DOI: 10.3390/coatings12111689.
Timar, M.C., Beldean, E.C., (2022). Modification of Shellac with Clove (Eugenia caryophyllata) and Thyme (Satureja hortensis) Essential Oils: Compatibility Issues and Effect on the UV Light Resistance of Wood Coated Surfaces. Coatings, Vol.12(10), 1591. ISSN: 2079-6412. DOI:10.3390/coatings12101591.
Olărescu, A. M., Bartha, B., (2022). Sociohistorical evolution of the spatial structure of rural housing in the sub-carpathian area of Romania. PRO LIGNO, Vol. 18 (1), pag. 36 – 49. ISSN (Online): 2069 – 7430.
Nicolau, A., Pop, A., Coșereanu, C., (2022) 3D Printing Application in Wood Furniture Components Assembling. Materials, Vol. 15(8), 2907. ISSN: 1996-1944. DOI: 10.3390/ma15082907.
Georgescu, S.V., Sova, D., Campean, M., Cosereanu, C., (2022). A Sustainable Approach to Build Insulated External Timber Frame Walls for Passive Houses Using Natural and Waste Materials, Forests, Vol. 13(4), 522. ISSN1999-4907.DOI: 10.3390/f13040522.
Lungu, A., Timar, M.C., Beldean, E.C., Georgescu, S.V., Cosereanu, C., (2022). Adding Value to Maple (Acer pseudoplatanus) Wood Furniture Surfaces by Different Methods of Transposing Motifs from Textile Heritage. Coatings, Vol. 12(10), 1393. ISSN: 2079-6412. DOI: 10.3390/coatings12101393
Mazaherifar, M.H., Hosseinabadi, H.Z., Coșereanu, C., Cerbu, C., Timar, M.C., Georgescu, S.V., (2022). Investigation on Phoenix dactylifera/Calotropis procera Fibre-Reinforced Epoxy Hybrid Composites. Forests, Vol. 13(12), 2098. ISSN: 1999-4907. DOI: 10.3390/f13122098.

Facultatea de Design de Mobilier și Inginerie a Lemnului

unitbv.ro

Știri și evenimente

Absolvenții în Fața Companiilor 2024

Decontarea abonamentelor de transport pentru luna decembrie

Negocierea contractului colectiv de muncă

Contracte Internaționale

2013

2014

2015

2017

2018

2019

2020

2024

Contracte nationale cu terti

2011

2012

2013

2014

2015

2016

2017

2018

2019

2022ː

Brevete de inventie

2011

2012

2013

2014

2015

2017

2019

2021

2022

Articole ȋn reviste indexate ISI si BDI

2011

2012

2013

2014

2015

2016

2017

2018

2019

2020

2021

2022

Personal

Business

Ultimate